Thank You
I am using the D-Tek Fuzion with just a 1/8" thick Oring. I chill my water and control it digitally at 50 to 53F. It helps to keep the temps down
Water cooling setup is a Dehumidifier with the Rad dropped in a Rez with about 2 gallons of water in it, as well as my Ehiem 1260 pump. I have a digital controller which is set to turn the dehumid on/off at my specified temps.
The whole setup is about 15' away from my computer,(hence the 1260 pump), in another room,( water lines run behind my Bath Tub and thru the walls)
When I built the upstairs addition, I set it up that way with an alcove for the dehumid/res so it is tucked away out of sight.
I run the lines to the Fuzion, then to my MCW60 on my vid card, then back to the Rez, works out pretty slick and I never hear the dehumid at all. Been running this cooling setup for about 4 years now. I could run the water colder very easily, but then I would need to insulate all the lines/blocks etc. Too much of a hassle for how often I change things, so I found that 50 to 53F is a good compromise to no insulation in the actual computer, and No condensation at those temps.
Sorry for the Long winded reply
Larry
Originally Posted by Big Lar
Thank You
Reply With Quote
Bookmarks