Quote Originally Posted by justapost View Post
Checked to make sure all MSR's are modified.
Did you run your benchmarks with weak or normal mode for the mem?
What do you mean by weak and normal mode here?
Now that cpu should survive till k10.5 at least, so i tried 1.1VID at 2.6GHz. I expected prime95 to fail but it did not also no power consumption change.
Hmm.. it modifies them on all Phenoms according to guide AFAIK. What voltage and VID did it give you?
Try 0x3000100A from 1.25VID, it should give you a ~10W AC idling increase in power. If not then something with your CPU MSR is going iffy.
In case you missed cuz i updated an old post, i have an USB-stick requiring 30W.
Yeah I saw it, it's very weird and well, too high
C001_ 0064h-0068h are the P-State status registers, first bit is interesting.
It's zero here, that means the rest of this msr register is invalid.
Thanks but are you sure that's their only relevance?
You can modify vcore in steps of 0.00625V that is half of what you can do with VID's (0.0125V step size).
Have you actually tried these work? Very good options if they do. What (%) Vdrop and Vdroop does the board have?
Don't like USB keyboards, still causing issues i don't want to spend my time fixing. Good to have a vnc-service running in such a case.
Tried both, last time it was PS/2, both have same problems here.