Thanks for the results!Originally Posted by justapost
Interesting, the board is slower overall, especially in L2 and L3 and latencies. The Plat. benches a little higher than that as I bench with all software running to show ideal bandwidth there (AV/FW in background just paused). It will fall shorter of it which I didn't expect.
Yeah the TLB fix isn't applied there you can see by your L3 scores. If it is, the L3 is very low and slow or it doesn't run at all.Checked the TLB fix, both registers are changed on all cores, so the fix is waterproof.
BTW does Memset not work fully for you? It was displaying wrong speeds there for some reason.
It's the correct register as I've seen in the guides, try 1.55VID and see if idle power shoots up.Also tried to modify the CPU VID. AMD PM reports the change but the power consumption does not change when I switching between 1.3V and 1.225V.
BTW, what does MSR C001_0064 show, do you remember? I've forgotten, it's something related to the NB IIRC.
True, they're only to allow you more intermediate, high and low volts, nothing else. So if you want a voltage between say 1.225V to 1.23V and your BIOS doesn't allow it, then changing VIDs will give you an option for that voltage in there.KTE, didn't you mention that vid's are not needed if the core voltages can be manipulated?
Yea USB problems on this board and they crap out like that randomly. I was stuck because you can't press any key at all so you can't shut down but a power supply off while OS is running which I didn't want to do as it destroys system too much and I had many works unsaved.USB problem? Go on with smilies.
OT: Lol, had to cmos flash the p5k-e yesterday cuz it did neighter recognize and usb nor an ps/2 keyboard.
That's a lot for idle. Somethings wrong somewhere. It could be your PSU too, if it falls in efficiency steeply.Update: Damn having the power consumption issue again after i switched back to the 2.6GHz settings. It are 182W AC in idle now, thats +40W.
Reply With Quote
Bookmarks