Quote Originally Posted by dropglock View Post
Well currently I raised 3 settings in the bios. Here is what I raised:
1.375 VTT FSB Voltage
1.15 SB Core Power
1.7 I/O Power.
and now it is 30 min stable for now. I still have 30 min to go to get 1 hour stable OCCT so we'll see. If this is stable I will lower the sb power and I/O power and stress again. But like I said my previous settings was stable 1 hour OCCT, then it failed in 30 min when I stressed again. I'll even stress with the settings that OCCT failed in 30 minutes again just to make sure.

EDIT: Just failed OCCT with 29 minutes to go at:
1.375 VTT FSB Voltage
1.15 SB Core Power
1.7 I/O Power.

Maybe I missed something, but are you sure you have degradation. There's not much difference between getting an hour vs 30min. Maybe the ambient is a little higher this time. I can run Orthos for an hour at 4.3G at 1.35v vcore, but if I have the heater running in the room, it fails after 30min. Turn off the heater and let the room cool down and its back to an hour.