**Official DFI LanParty UT P35-T2R Review/Overclock/Guide Thread**

[Mekrel]

give me a minute and I'll try mine.


edit: YES, and no they refused to boot with auto settings but I set 5-5-5-18 manually and they booted right up. so at least your sticks will work, just need a little tweaking before hand. and btw my sticks have been abused for many many months so it is possible a better set would boot from spd's. mine only call for 1.8 volts, lots of peoples have 2.0 or 2.2 spd settings.
[IMG][/IMG]

Hi mate, just a quick question about this, if the SPD is 1.8v then they will run at the timings at each speed with that? I know that's what SPD is, but can't get my head around why some would only need 1.8 and some 2.2, as that's a large difference.

Edit: Straight in at 3.6 at seems to be priming away happily, 266/667, 1.43 vCPU, 1.5vMCH, 1.43VTT 100,100,100. Think I'll work around this for now, with case fans set to low the NB gets up to 57 and I'm randomly losing control over my mouse which I think may be linked. Although it does come back and then goes when prime starts a higher iteration. See if I can work voltages down, once I've got the NB in my loop ill push on up.

Thanks for the excellent thread guys, Praz, C-N, Brotha and the rest, give yourselves a tap on the back