Big thx
Big thx
my turn. nothing spectacular, i cant afford a city of thermalright
XS WCG Rules: #1: don't pull fart_plume's finger #2: Dave aka Movieman, don't give him your phone number if you like your hearing
XS WCG Note: There are 2 sets of points, WCG and Boinc. WCG = 7x Boinc
Project: Dark Matter (<- link) - Asus Maximus II Formula, Intel X3330 3.4ghz @1.32v under load, corsair ddr2 1066 8gigs, evga gtx260 core 216, pc p&c 750W, EK Supreme HF Nickel, iandh 175 res, Swiftech MCP355, Black Ice GTX G2 240, Lian Li v1200b
silverstone tj07 build log
nice ! just wanna know what happen to the 2 92mm fans ?
master of thermalright / mr thermalright with an arctic cooling gpu cooler... what an insult !
Last edited by Ar3s; 12-25-2007 at 09:14 PM.
Everyday is a NiceDay
Ar3s, thanks, took them out cause i dont have airflow in that direction and i get good temps without them. i'll be getting some 92mm filters to cover up the holes
XS WCG Rules: #1: don't pull fart_plume's finger #2: Dave aka Movieman, don't give him your phone number if you like your hearing
XS WCG Note: There are 2 sets of points, WCG and Boinc. WCG = 7x Boinc
Project: Dark Matter (<- link) - Asus Maximus II Formula, Intel X3330 3.4ghz @1.32v under load, corsair ddr2 1066 8gigs, evga gtx260 core 216, pc p&c 750W, EK Supreme HF Nickel, iandh 175 res, Swiftech MCP355, Black Ice GTX G2 240, Lian Li v1200b
silverstone tj07 build log
64dragon, nice wire management
if that is a silverstone FN121 on the top with some transparent fan obviously the FN121 will push almost no air out and start to sound terrible after sometime cause of its sleeve bearing.
Everyday is a NiceDay
latest encarnation of my rig,
when it was watercooled.
due to a leak i decided to revert back to air. so out with the water in with the air
Main rig
========================
Cpu: Intel i7 920 @4.2ghz - Ultra 120
Motherboard: Evga x58 classified
Ram: 12gb 6x2gb Corsair 7-7-7-20
Psu: Hiper 880watt
Gpu: Ati radeon 5870
Sound card: Asus xonar d2
HD Array: 3x ocz 60gb summits (raid 0) & 300gig velociraptor
HD Controller: Adaptec 2405 SAS controller
Optical: Samsung 22x dvd-rw
=========================
Boo! I love my water cooled A05, but to each his own I guess. I'm guessing the screen you have in the first drive bad doesn't go back into the drive bay very far so that you could fit the 3x radiator? I went the other rout and but the rad at the bottom of the case, but I am looking into putting a 2x rad on top for a GPU loop.
i5 750 @ 3.2 Ghz, stock volts on stock cooling
4GB G.Skill DDR3-1600 7-7-7-21
Gigabyte P55-DS2
EVGA GTX260 192shader
my new shiny case:
i like having a window now, its pretty inside
Corsair HX620 ::: i7 2600k @ 4.4ghz ::: Asus P8Z68-V ::: X-Fi Xtreme Gamer
16gb G.Skill Ripjaws ::: eVGA GTX 460
Crucial M4 64gb ::: 5tb HDDs
Sc4mpi What happened with the leak dude?
Well the ddc top seemed to have a hairline crack which wasnt noticable when installing it. so as the water heated up the crack expanded and water started to drip onto the psu. which i only noticed when the psu when bang a week agoOriginally Posted by Origin_Unknown
. so on closer inspection you could only see it leaking if you took the side panel off maby once you have played a game for a hour or two. so i decided that i was lucky it dint take the rest of the rig with it and choose to go bk to air for the safe factor :> (hense the new psu :P)
Main rig
========================
Cpu: Intel i7 920 @4.2ghz - Ultra 120
Motherboard: Evga x58 classified
Ram: 12gb 6x2gb Corsair 7-7-7-20
Psu: Hiper 880watt
Gpu: Ati radeon 5870
Sound card: Asus xonar d2
HD Array: 3x ocz 60gb summits (raid 0) & 300gig velociraptor
HD Controller: Adaptec 2405 SAS controller
Optical: Samsung 22x dvd-rw
=========================
My new air cooled build. A few things are still to do
Sc4mpi ouch, sorry to hear that! Ill be leaving the air cooling world Jan / Feb so i hope i have better luck!
Steffen Nice Rig, love the cable management. Ill be using the older bro of that case
Tommy_Hewitt and Steffen
Very nice cable management
E2160 @ 3200MHz | Gigabyte P35-DS3 | 2x1GB @ 1000MHz | eVGA 9600GT 512MB
HR-03 + will come for the GTX once i can find the damn thing in my country. I also added a Scythe Kama bay below the dvdrw drive (not in pics) and have another Scythe sflex in front of the top HDD compartment.
Click on pics for bigger version.
Intel i7 920 d0 @ 4410MHz @ 1.36v :: Prolimatech Mega Shadow :: Gigabyte EX58-UD5 F9K :: 6GB Mushkin XP3-15000 :: HIS 5870 :: Corsair 1000W :: HannsG 27.5" :: Lian Li V1010B
BOOO come back to the water side...with the uv lights
due to a leak i decided to revert back to air. so out with the water in with the air
I like turtles
My new air cooled build. A few things are still to do
silver and blue look amazing...this actual challenges the coolness and look factor of liquid cooling too...GREAT job man
I like turtles
yep, and i ordered one based solely on his pictures alone rofl
Hey Origin_Unknown have you got any pics of your rig?
your specs/sig looks like it's one extreme air cooler
well here's mine
A little bit updated
Thanks for the info Ar3s...the website didn't say if it was sleeve or ball.
Nice!My new air cooled build. A few things are still to do
very very sexy rigs here guys
some pics of mine
I am a big fan of the old Coolermaster ATC Cases
Ghetto modded my GTX
Click on pics for bigger version...
FULL LOAD - FUR test for 15minutes + prime95 for 4minutes
IDLE - 5 minutes after i stopped FUR test and prime95
Temps will never get this high in 3dmark or any game so i'm really happy about it
Intel i7 920 d0 @ 4410MHz @ 1.36v :: Prolimatech Mega Shadow :: Gigabyte EX58-UD5 F9K :: 6GB Mushkin XP3-15000 :: HIS 5870 :: Corsair 1000W :: HannsG 27.5" :: Lian Li V1010B
Did you disable the stock fan on the 8800GTX when you ghetto modded that 12cm onto it? I'd imagine the stock fan wouldn't be very effective without the shroud.Ghetto modded my GTX
E8500 @ STOCK | 4GB Mushkin XP2-8000 @ STOCK | MOBO TBC | GFX TBC | 2x320GB SE16 RAID 0 | 2x1TB Hitachi SATAII | XFI Fatal1ty | Coolermaster 1kW PSU | TJ07
Reply With Quote
Bookmarks