Quote Originally Posted by zsamz_ View Post
i honestly dont need to hit 1300+ eva but still gonna try lol
my thing is this mushkin memory i got freakin me out takin way too much votls to be stable i think its d9gkx
any way to test to make sure? withought removin heatspreaders lol
my ballistix do 1200+ 2.13v @1200MHZ but dont do 3-3-3-8 @800mhz like my mushkins
i gonna see if the board likes micron fatties
that's normal older D9x stuff need such volts... newer D9 seem to be alot better

Quote Originally Posted by Praz View Post
\
That's how the 12/07 and 12/18 BIOS is set up. I prefer it that way as you know the actual time delay in pico seconds. However it doesn't seem we have access to all the values. If using defaults the board may set a value of 465ps. In the BIOS there will be an option of 420ps or 490ps Obviously the board has access to values that we don't as of yet. Another thing I've noticed is when setting back to Current Value. Instead of reverting to board default it locks it to whatever value is presently set. Have to do a FSB change to get the board to actually go back to auto selecting the value.

I'm not sure what the processor will do on this board . It did 560FSB on the P35.

Edit: I've got the board tore down right now. Tomorrow when I get it back together I'll load up WinFlash. I usually flash from a USB drive so haven't tried WinFlash with this board.
weird... might stick with 11/28 for now then heh..

btw, what you set to boot from in bios for USB drives.. never could get USB drive with bootable floppy image to boot on DFI boards... tried USB-FDD/USB-ZIP/USB-HDD and no luck ??