Official DFI LanParty UT X38-T2R(and LT) Discussion/Review/Overclock/Guide Thread

[eva2000]

nice work george.....really a good kit you have....my tracer don't like 444 and also GKX prefer to go up with 5.5.5

i'll test again...but also my impression was that x38 was a bit slower...

thanks .. play with clock fine delay particularly dimm 1 and 3 clock fine delay and sometimes command clock fine delay

Didn't have time to try any other sticks. About the best these will do. They don't come close to your Tracers Eva.

http://edgeofstability.com/images/x38lt/misc/532x7_everest.jpg[/IMG]
http://edgeofstability.com/images/x38lt/misc/532x7_32m.jpg[/IMG]

Clock Setting Fine Delay Page
Ch1 Clock Crossing Setting................More Aggressive
DIMM 1 Clock fine delay...................280ps
DIMM 2 Clock fine delay...................490pd
DIMM 1 Control fine delay.................560ps
DIMM 2 Control fine delay.................350ps
Ch 1 Command fine delay...................840ps

Ch2 Clock Crossing Setting................More Aggressive
DIMM 3 Clock fine delay...................280ps
DIMM 4 Clock fine delay...................420ps
DIMM 3 Control fine delay.................420ps
DIMM 4 Control fine delay.................420ps
Ch 2 Command fine delay...................840ps

nice FSB on that cpu!.. my E6850 L720A489 maxes out at 502FSB on DFI X38, 501FSB on Asus Blitz Formula and 490FSB on DFI P35. Is that 12/18 bios with ps values for clock fine delay ?? seems more confusing than single/doubel digit values ?? I can't seem to flash to 12/18 bios it won't recognize it in winflash - says please load correct bios!. AWDFLASH only ??? It recognizes 11/28 bios though.

my mushkin requires much more voltage compared to my ballistix
ballistix needs 2.17v for 1200 n mushkin needs 2.32v
testing out the mushkin it can do 3-3-3-8 @ 800mhz 2.3v n 5-4-4-12 @ 1200mhz2.35v but no way i can go higher than 1200 is it possible i have d9gkx n not d9gmh in them? or it is just a crap pair that i got from rma?

play with clock fine delay can make a huge difference! i.e. 600mhz 5-5-5-9 at 2.19v not memtest stable after clock fine delay tweaks 640mhz 5-5-5-9 at 2.19v memtest stable

eva2000 you really seem to like this board

I hope they will be available again when the wolfies come out in January.

yeah i do... happy it matches max FSB as my Asus Blitz Formula unlike my DFI P35 which was 10FSB less max FSB. Only outstanding issue on DFI 38 is working 5:8 divider and more stable 3:5 and 4:5 divider fix. 1:1, 5:6 and 2:3 seem fine though.