Quote Originally Posted by TouGe View Post
There are a few posts covering this already somewhere in this thread.

NB --> HR-05 SLI/IFX or just a regular IFX depending on your CPU HS configuration.

SB--> Same as NB unless you are running CF then you'll need something low profile like this.

I use the SLI/IFX on my NB w/ fan and I sit at 40C while running OCCT w/ NB @ 1.57V and 34-35C @ idle.
I have the Enzo I linked to on my SB w/ 1.075V and two HD 2900XT's sitting on top of it and it sits at 37C under load and 34 @ idle.



The heatpipe assembly actually comes apart in two pieces so if you remove the NB/SB heatpipes you will still have a separate set covering the mosfets to the rear and top. You can also remove this part and use two HR-09's type 2 to cool this area which is what I did.
I use a Ultra Extreme 120 facing backwards with a fan blowing on it, so I guess I can just use a normal HR-05 on the NB?.. The CPU fan with then blow on it also, and the Antec 182 fan on the back will also pull air out just behind it (if there is room for the HR-05 between the case fan and the Ultra 120 Extreme).

I have 1 8800GT gfx card, (I am at work now so I am not sure how the spacing is), so do I need a SLI for the SB?..

JH_man