Water Cooled Case Gallery

[deepsilver]

yea its supposed to be red but combined with the flash of the camera
it looks crappy

no more colors for me, im moving to tygon black.. but thanks for your commentary

That's a good decision.

[stormshadow]

Hi guys, have updated me baby and am here to show her off!!!

Enjoy

is it just me?

but i think the waterflow on your fuzion is backwards.

[deepsilver]

My AquaDrive:



with Cuplex:



and the new AquaStream XT Ultra:

[Sparky]

is it just me?

but i think the waterflow on your fuzion is backwards.

nope not just you, I think you're right! Looks like the pump outlet is straight to the corner outlet of the fuzion, not the inlet...

[MorGo7h]

Just fix the fuzion and you have a nice rig

[Xilikon]

Not me, it looks right. If you look at other pics, you will see a tube coming from the pump to the radiator and another coming up from the rad 90 degree to the CPU. It's just a optical illusion caused by a picture angle.

[Mekrel]

It's wrong, the water is flowing out of the FuZion inlet, into northbridge block, into GPU block and then into the reservoir.

[Xilikon]

Doh, looked at the wrong place

[Spawne32]

My AquaDrive:

IMG]http://i223.photobucket.com/albums/dd287/deepsilber/AquaDrive.jpg[/IMG]

with Cuplex:

IMG]http://i223.photobucket.com/albums/dd287/deepsilber/AquaDrive_with_Cuplex.jpg[/IMG]

and the new AquaStream XT Ultra:

I cant believe how you guys take pics with such awesome lighting, where abouts is that pump sold? And how good is it?

[Fujimitsu]

I cant believe how you guys take pics with such awesome lighting, where abouts is that pump sold? And how good is it?

The software that comes with it looks pretty sweet, not sure about performance though theres a post about it somewhere.

[stormshadow]

nope not just you, I think you're right! Looks like the pump outlet is straight to the corner outlet of the fuzion, not the inlet...

Just fix the fuzion and you have a nice rig

i knew it!

but i can't help but wonder...

how are the temps in that configuration?

[ka lok]

Bugger!! didnt even know that the Block has to be a certain way . Will Change that tom.

The temps are not too bad (i think), 38c idle and 52c load. My E6600 is overclocked to 3.6ghz needing 1.5125v and havent oced 8800gtx yet.

Cant get it to be stable with orthos yet, but will play crysis with no probs, albeit stuttery at times.

By the way, silly qu ahoy- do i need to turn cpu block upside down or do i need to switch tubes round?

Sorry if im not making much sense, very new to all this.

[stormshadow]

Bugger!! didnt even know that the Block has to be a certain way . Will Change that tom.

The temps are not too bad (i think), 38c idle and 52c load. My E6600 is overclocked to 3.6ghz needing 1.5125v and havent oced 8800gtx yet.

Cant get it to be stable with orthos yet, but will play crysis with no probs, albeit stuttery at times.

By the way, silly qu ahoy- do i need to turn cpu block upside down or do i need to switch tubes round?

Sorry if im not making much sense, very new to all this.

in this case, the block is mounted fine. Just redo the tubing so that the water goes IN through the center hole and OUT through the corner hole.

[ka lok]

cheers for pointing that guys

by the way, what are the implications of having the tubes the wrong way round? just curious

[stormshadow]

cheers for pointing that guys

by the way, what are the implications of having the tubes the wrong way round? just curious

you tell us

doesn't seem like it's a world-ending error. water is still flowing - just not as optimally as it could be.

[Nate P.]

Nice rigs guys.

[ka lok]

will keep you guys updated on if there is any differences in temps after I switch the tubes round.

have to stop typing now coz wife is trying to sleep and apparently I tap keys very loudly! speak to u guys tom!

[AAjax]

I cant believe how you guys take pics with such awesome lighting, where abouts is that pump sold? And how good is it?

No doubt, looks sweet, but how dose it werk?

[AAjax]

http://www.sharkacomputers.com/aqcoaqmoeh10.html

Never mind, google is my friend

Edit: 7ft max head? Am I figuring this right?

[Nate P.]

I cant believe how you guys take pics with such awesome lighting, where abouts is that pump sold? And how good is it?

Looks like a render.. I could be wrong though.

[YugenM]

http://www.sharkacomputers.com/aqcoaqmoeh10.html

Never mind, google is my friend

Edit: 7ft max head? Am I figuring this right?

That's a non-XT version.

[AAjax]

That's a non-XT version.

Thx!

[fireice2]

can we get some more pics then please

No problem. here are some more pics.

[disruptfam]

looks sik!!!! is that just distilled water no coolant??

Looks nice like that i think i may just use distilled water aswell and let the uv neon's light it up

when you upgrade our gfx card take out the fan side bracket thing and wc the gfx card aswell

[peebee]

There are also clear coolants available. Here in germany one of the best, without making the tube looking cloudy. It is called Innovatek Protect.
Available as a concentrate to mix with distilled water, or also ready mixed.



I hope to have my 343b ready soon. I need more space for my 2 loops. They won´t fit in my old built