STAGE I:
STAGE II:
STAGE III (work in progress):
Teardown complete
New motherboard prepped for blocks:
Blocks tested and mounted:
![]()
STAGE I:
STAGE II:
STAGE III (work in progress):
Teardown complete
New motherboard prepped for blocks:
Blocks tested and mounted:
![]()
Last edited by stormshadow; 08-21-2007 at 11:29 PM.
New work-in-progress - watercooled dual-rad Lian-Li A05:
http://www.xtremesystems.org/forums/...d.php?t=156162
Opteron 175 @ 3.0GHz
273x11
TUBING STARTED:
SECOND RADIATOR MOUNTED:
![]()
New work-in-progress - watercooled dual-rad Lian-Li A05:
http://www.xtremesystems.org/forums/...d.php?t=156162
Opteron 175 @ 3.0GHz
273x11
PSU in front of the lower rad?
Build evolving nicely.
Great job.... go on!!!
iMac 24''
BNDMOD @ Cruz Alta (Cba.) Argentina
New work-in-progress - watercooled dual-rad Lian-Li A05:
http://www.xtremesystems.org/forums/...d.php?t=156162
Opteron 175 @ 3.0GHz
273x11
temporary test setup.
zip-tied the pump / mount to it's approximate final position...
LOOP:
-----------PUMP----------
--------^---------V-------
-------RES-------CPU-----
--------^---------V-------
-----MCR220-----NB------
--------^---------V-------
-------SB------MOSFETS--
--------^---------V-------
----8800GTS<--MCR220--
Last edited by stormshadow; 08-21-2007 at 11:49 PM.
New work-in-progress - watercooled dual-rad Lian-Li A05:
http://www.xtremesystems.org/forums/...d.php?t=156162
Opteron 175 @ 3.0GHz
273x11
I liked the way you were the first to post WC'ing this case last winter, and good to see you are expanding on the concept!In regards to intake for the bottom rad...are you thinking of putting the Lian-Li V-series wheels under that A05?
That pump mounting looks nice, but can't figure out how you made it?
thanks
went to the hardware store and bought some rubber bumpstop-style feet for now. I looked into the lian-li wheels but the mounting of them would be really tough considering the placement of the lower rad and the lack of mounting points / space there. Still brainstorming but yea - definitely will be raised at least an inch - inch and a half.
80mm Fan brackets. That's what I love about the Alphacool top. Good performance and a bunch of mounting options. You can either use the 80mm mounts on the top/bottom or the 3.5" bay mounts on the side of the plexi-top.
I picked up the extenders / standoffs at O.S.H. (hardware store).
They are two 1-inch extenders screwed together. I'm going back today to replace one of the two with a 1/2 inch one to eliminate the unnecessary height of the pump setup.
New work-in-progress - watercooled dual-rad Lian-Li A05:
http://www.xtremesystems.org/forums/...d.php?t=156162
Opteron 175 @ 3.0GHz
273x11
Lookin good stormshadowGlad to see this build is still evolving since I always liked it. I don't know if you remember me from when I posted in your harforum worklog.
Current setup: http://www.xtremesystems.org/forums/...postcount=1843
looks great! keep it![]()
For the record I am not sick, nor am I a gamer, nor am I a sick gamer. That name just sounds really cool to me but dont put me under that stereotype at all.
nevermind... addicted to COD4 and Free Online Games baby!
![]()
thanks.
without even opening, I just found out that my new Corsair HX620 PSU won't work with this setup since the modular inputs would be blocked by the radiator. I could flip the PSU but i want the intake to come from the bottom like the radiator.
Returning that and picking up a Seasonic M12 700W PSU. It' has it's modular inputs towards the sides as opposed to along the bottom.
New work-in-progress - watercooled dual-rad Lian-Li A05:
http://www.xtremesystems.org/forums/...d.php?t=156162
Opteron 175 @ 3.0GHz
273x11
Wow!!!
120.4 basicly! I guess you could fit 2 Thermochill PA120.2's and run it passive so total silent as they disapate heat very well.
Are there fans on the top of that top placed rad?
Look like SLI/CF couldn't happen there!
Can we get photos of the other side! This is nut and very cool
you make it look like this case has sooo much room
Nikon User
Nikon D200 (Gone =( )/D300
Nikkor 18-105mm(Gone) // Nikkor 50mm 1.8 // Nikkor 55-200VR(Gone)
Tokina 12-24 // Tamron 90mm //
Manfrotto & Benro Legs // Benro Ballhead.
Current Lust = 80-200 Or 70-200VR1 <--Pending
No more computer parts for me... Well for now until I
really REALLY need to upgrade.
now that is how you do tubing management, short as possible.. great jop there mate.
Evga X58 sli under cascade
http://www.xtremesystems.org/forums/...d.php?t=219788
Evga X58 Sli ultimate overclocking/ overview/ discussion thread
http://www.xtremesystems.org/forums/...d.php?t=221082
proud owner of E8600 Q822A435
very nice looking...well thought out....*-)
750W Thermaltake Modular PSU
DFI UT X58-T3eH8
Core i7 920 @ 20 X 200 1.325V
CORSAIR XMS3 DHX 4GB (2 x 2GB) DDR3 1600
768 MB EVGA 8800GTX
1 X 36GB WD Raptor
2 X 150GB WD RAPTORS
1 X SpinPoint P Series SP2504C 250GB
1 X Maxtor 6L300S0 300GB
16 X NEC DVD Burner
7 120mm Yate Loon LED Intake Fan
4 120MM Yate Loon Exhaust Fan
28" HANNSPREE Monitor
Watercooling Loop:
1 X PA120.3
1 X PA120.2
2 X Laing DDC's w/EK-DDC Dual Turbo Top
7 X Yate Loon Blue LED Intake Fans
4 X Yate Loon Blue LED Exhaust Fans
1 X Swiftech GTZ
1 X GPU EK Fullcover Waterblock
1 X XSPC Dual Bay Reservoir 5.25" with Bubble Window
New work-in-progress - watercooled dual-rad Lian-Li A05:
http://www.xtremesystems.org/forums/...d.php?t=156162
Opteron 175 @ 3.0GHz
273x11
got a coupla parts in today...
x-fi gamer
seasonic M12 700W modular PSU
this should hold me over for a while...
![]()
New work-in-progress - watercooled dual-rad Lian-Li A05:
http://www.xtremesystems.org/forums/...d.php?t=156162
Opteron 175 @ 3.0GHz
273x11
Looks like if you flipped the top rad around and fitted it into the bays a bit you might be able to get a 2nd GFX in there. Really impressive, new updates soon i hope
Pretty kewl for such a small case![]()
[SIGPIC][/SIGPIC]
wired up and packed in...
![]()
New work-in-progress - watercooled dual-rad Lian-Li A05:
http://www.xtremesystems.org/forums/...d.php?t=156162
Opteron 175 @ 3.0GHz
273x11
All that stuff nicely packed into such a small area. Although I'd imagine that it'll be a pain the arse to access your ram w/ the pump in front of it.
New work-in-progress - watercooled dual-rad Lian-Li A05:
http://www.xtremesystems.org/forums/...d.php?t=156162
Opteron 175 @ 3.0GHz
273x11
thanks andy
blue antifreeze added.
final button-up tonight
![]()
New work-in-progress - watercooled dual-rad Lian-Li A05:
http://www.xtremesystems.org/forums/...d.php?t=156162
Opteron 175 @ 3.0GHz
273x11
Bookmarks