Here are the bios settings I changed:

CPU Feature
- Thermal Management Control: Disabled
- PPM(EIST) Mode: Disabled
- Limit CPUID MaxVal: Disabled
- CIE Function: Disabled
- Execute Disable Bit: Disabled
- Virtualization Technology: Disabled
- Core Multi-Processing: Enabled

Exist Setup Shutdown: Mode 2
CLOCK VC0 divider: AUTO
CPU Clock Ratio Unlock: Enabled
CPU Clock Ratio: 8x
- Target CPU Clock: 3200Mhz
CPU Clock: 400FSB
Boot Up Clock: AUTO
DRAM Speed: Auto
PCIE Clock: 100Mhz

Voltage Settings
CPU VID Control: 1.4375v
CPU VID Special Add: AUTO
DRAM Voltage Control: 2.27v
SB 1.05V Voltage: 1.15v
SB Core/CPU PLL Voltage: 1.95v
NB Core Voltage: 1.53v
CPU VTT Voltage: 1.40v
Vcore Droop Control: Enabled
Clockgen Voltage Control: 3.75v
GTL+ Buffers Strength: Strong
Host Slew Rate: Weak
GTL REF Voltage Control: Disable
x CPU GTL1/3 REF Volt: 110
x CPU GTL 0/2 REF Volt: 110
x North Bridge GTL REF Volt: 110
PSU - CORSAIR CMPSU-620HX ATX12V v2.2 and EPS12V 2.91 620W Power Supply - +12V Rails: 3

The stable bus speed is currently 360 once I go over that it doesn't boot and I get the C1 POST error. The dividers for the RAM is 5:6, don't think I am currently doing anything with the timimgs currently. Thanks for the quick response. Let me know what other information would be helpful.