we've found THE GOLDEN ONEs : AMD Athlon64 World Record Thread!!

[gianni-gt]

i think so....

[massman]

OMG ... such a chip

[stunned_guy]

Are there any hard mods for an DFI board for more vcore ? I want to try more than 1.55 x 136%

[knopflerbruce]

Are there any hard mods for an DFI board for more vcore ? I want to try more than 1.55 x 136%

Do 90nm survive more than that?

[stunned_guy]

I don´t know but I think no The most I could do was 2.01 volts about an 3500+ Venice E3....then I never get one cpu that could do that

Hehe, I find another screen: 3700+ @ 2.032 V
http://img237.imageshack.us/my.php?i...w2032wzdq9.jpg

[knopflerbruce]

I don´t know but I think no The most I could do was 2.01 volts about an 3500+ Venice E3....then I never get one cpu that could do that

Hehe, I find another screen: 3700+ @ 2.032 V
http://img237.imageshack.us/my.php?i...w2032wzdq9.jpg

Maybe I can try 2v++ on some of my crap chips lol. We'll see Did it on a clawhammer, but that's not TOO much. At least it survived, which means it wasn't enough.

Won't be any benching this weekend, btw. Too much work @ Univ etc etc etc...

But next weekend I hope there will be more scores from my CPU vault.

[gianni-gt]

i had never a chip that i could boot with 2V

@bruce: i hope you don't crack my 3500+ wr

[stunned_guy]

My next project: cracking the 3500+ WR
First I have to change all my boards now 4 DFI are laying here around with no boot.

[gianni-gt]

my target is still the 4000+ wr... 3 new cpu's on the way...

[stunned_guy]

The 3400+ Newcastle socket 939 record is now mine....but I wonder how horrible cold bug that old cpus have
Only 219 Mhz @ -38°C....that is nothing for an Newcastle...
Have to do better temps on that cpu so i need -10°C and I will crack the 3 Ghz.

[CCUABIDExORxDIE]

130nm cpus had NO coldbug, it only showed up in 90nm and below.

[stunned_guy]

???
Where do you have this ? I can´t believe that...

[i found nemo]

no it's true. 130nm have 0 coldbug.

[CCUABIDExORxDIE]

check out old FX55 benching when the cores were clawhammer, pedro rocha used ln2 for those runs, first chip over 4ghz was 130nm too btw.

[knopflerbruce]

i had never a chip that i could boot with 2V

@bruce: i hope you don't crack my 3500+ wr

My next project: cracking the 3500+ WR
First I have to change all my boards now 4 DFI are laying here around with no boot.

my target is still the 4000+ wr... 3 new cpu's on the way...

My main targets are:

Opty 150
Opty 165
Opty 185
X2 4200+ Toledo
X2 4800+
3500+ SD
3500+ venice
3700+ SD

I want a few more, but I need better cooling for any FX WR's. Not so sure I can break all of these, but I'm pretty sure I can get that 150 WR, as well as the X2 4200+. The rest... we'll see Hope I have a little bit luck with the coldbug.

@ gianni, I only have a CAB1E 0607APMW 3500+ Venice, the results for KACAE 0607APMW aren't too good so I have a feeling it's not so golden. But maybe the 0617 is! I don't need THAT high clocks after all.

check out old FX55 benching when the cores were clawhammer, pedro rocha used ln2 for those runs, first chip over 4ghz was 130nm too btw.

My FX53 has a coldbug. 250MHz FSB didn't work @ ~-40c (not so sure about the temp, but it did have a bug on dice). Same with my FX55 Clawhammer, btw. Not sure exactly where it had a bug, but it's not my mobo, or my memory that made it reboot. And not cpu speed either, as I was running a low multi.

[i found nemo]

r u gunna do the 754 plat-form too? lol

[Turrican]

hey bruce, you're extrem crazy.
i like that

good luck for the WRs. let the battles begin

[gianni-gt]

hehe this thread has now the most replies in the xtreme-overclocking-section ever (after "the world record" thread). s939 is still alive!!!

[knopflerbruce]

r u gunna do the 754 plat-form too? lol

I bought a DFi nf3 250gb a few months ago, actually.

I'm benching with a friend, as all my stuff is in his garage (and he's the one who can get dice for free :p), and he wants to see high numbers, a 3ghz s754 is of no interest to him i think. But once I get a phase change unit I'll bench the 3 or 4 s754 chips here in my apartment

I hope I'll be able to bench AM2 someday, too. It all depends on the money... And when DFi releases a 790 board.

hey bruce, you're extrem crazy.
i like that

good luck for the WRs. let the battles begin

Thanks m8! Gonna need it, gianni and the others are hard to beat.

hehe this thread has now the most replies in the xtreme-overclocking-section ever (after "the world record" thread). s939 is still alive!!!

And I think 3 of us have like 50% of the posts in this thread, if not more

[gianni-gt]

top 5 poster in this thread:

gianni-gt 218
knopflerbruce 96
stunned_guy 93
massman 81
Turrican 37

[Turrican]

w00t, i'm 5th

maybe i'll try to battle with you with my non-coldbugged fx55 under my new single stage

[knopflerbruce]

w00t, i'm 5th

maybe i'll try to battle with you with my non-coldbugged fx55 under my new single stage

stepping?

[Turrican]

stepping?

CABCE 0513 MPMW

[knopflerbruce]

CABCE 0513 MPMW

BC's have a bug i think. My FX55 won't do very high htt under dice, at least.

BH's are much better And BG's

So... how much have you tested your fx55, then? I mean... how high htt @ what temps?

[stunned_guy]

BH are the best And Single Stage wont be the best cooling for an FX You will need better cooling like casade or LN2.

Yesterday my FX-53 and the 5 Opteron 150 arrived. The Opterons all have 0532 MPMW Stepping, same wafer-id only the batch is various.

The Opteron 150 wr is hard to bet ---> bruce and I will fight back