Quote Originally Posted by Danger30Q View Post
Your CPU volts are extremely low for an OC of 3.2ghz. I would put it to at least 1.40V. I know most Q6600 owners with this board will go to 1.50V because the vdroop on this board is pretty big. For example, my Q6600 has almost a .06V vdroop during load which makes an effect 1.44V if I select 1.50V in BIOS.

You can safely start at 1.40V and work your way up from there. You may need to increase other voltages as well as you increase your OC.
Quote Originally Posted by Ace-a-Rue View Post
when one core drops off line and you have only a 75% overclock, it means your Vcore is not high enough to support the P95 event.

it also could mean that the memory or mch voltage is not sufficient.
Ahhh ....... so I don't have enough CPU voltage.

I thought I had enough seeing other people getting this speed with 1.25V.

Guess they just have a better chip ?