8800GT voltage mods

[largon]

Thanks metro.cl and dinos22!

Between 2 and 4 is 011
Between 2 and ground is 015

I'm suprised to hear these points measure that low values. Gonna have to have another look at the vGPU resistor network...
Everything else is like I expected. Especially the vGPU... Lot's of headroom to crank it up, the chip should take 1.4V with ease. :P

point 5 & 6? i get similar reading with you Dino just a couple of 0X of diference

Points 5 & 6 were discarded because that particular resistor wasn't in the end that very interesting.

so how do you read this as actual values
can someone tell me

would it be 10.4*200=2080Ω or 2.08kΩ
1.10*20K=22000Ω or 22kΩ

10.4 @ 200 dial = 10.4Ω
1.10 @ 20K dial = 1.10kΩ = 1100Ω
The dial selects the maximum measureable resistance. If the result is higher than the selected dial option then the device will simply display "1". So, in a way, one has to know approximately how much the measurement's result should be in order to accurately measure resistance.




Oh, and here is the vMEM mod & vMEM measuring points (stock vMEM is 1.8v ±5&#37: