MMM
Page 5 of 16 FirstFirst ... 234567815 ... LastLast
Results 101 to 125 of 380

Thread: Barcelona Opteron 2350(B1) arrived

  1. #101
    Xtreme Mentor
    Join Date
    Nov 2005
    Location
    Devon
    Posts
    3,437
    Quote Originally Posted by kyosen View Post
    Please calm down about scaling for SuperPI time...
    I'll try it again, with K8 Opteron 2212 and K10, with same OS
    Domo Arigato!
    This will clearly show performance improvement between K8 and K10 in applications you will run!
    RiG1: Ryzen 7 1700 @4.0GHz 1.39V, Asus X370 Prime, G.Skill RipJaws 2x8GB 3200MHz CL14 Samsung B-die, TuL Vega 56 Stock, Samsung SS805 100GB SLC SDD (OS Drive) + 512GB Evo 850 SSD (2nd OS Drive) + 3TB Seagate + 1TB Seagate, BeQuiet PowerZone 1000W

    RiG2: HTPC AMD A10-7850K APU, 2x8GB Kingstone HyperX 2400C12, AsRock FM2A88M Extreme4+, 128GB SSD + 640GB Samsung 7200, LG Blu-ray Recorder, Thermaltake BACH, Hiper 4M880 880W PSU

    SmartPhone Samsung Galaxy S7 EDGE
    XBONE paired with 55'' Samsung LED 3D TV

  2. #102
    Xtreme Member
    Join Date
    Nov 2005
    Location
    Porto, Portugal
    Posts
    265
    Quote Originally Posted by kyosen View Post

    And these are latecy test results with Everest Ultimate v4.20:
    at 2.0G=200x10: 76.0ns
    at 2.2G=220x10: 69.0ns
    at 2.4G=240x10: 63.4ns
    That's not bad... I think the «2.4G=240x10: 63.4ns» is not far form Intel Qcore @2.4Ghz.

    I would like to know how far RAM can run on a K10 system... If can catch Intel systems...


    Windows 7 Ultimate 64bit, SP1 Power By:
    Asus Rampage IV Formula
    Intel SBE 3930K
    Gskill RipJaws Z 14900 (1866 DDR3) 16GB 10-11-10-24
    EVGA 570 GTX SLI
    SSD Samsung P830 240GB
    Corsair AX850

  3. #103
    Xtreme Enthusiast
    Join Date
    Aug 2007
    Location
    Madison, TN
    Posts
    934
    Thanks for all the hard work Kyosen. The L3 latency was pretty much expected. At this point no one seems to know how that will affect performance, but time will tell. Very supprised about the spi scores with gangled and ungangled. Could have had a better choice of terminology, lol, but maybe a repeat of the scores just to be sure. Looking forward to anything you'd like to run, looks great so far.

  4. #104
    k|ngp|n/Sham my brothers
    Join Date
    Aug 2002
    Location
    Athens---Hellas
    Posts
    5,693
    L3 Cache had a good impact back in the days of P4 Northwood (Gallatin) CPU....You could gain about 4% - 8% more depending on applications....So IF Barchy gets ONLY 4-8% more than K8, It's the L3 Cache, so AMD isn't going to be that fast....If it gains more, then it will be OK....
    INTEL PWA FOR EVER

    Dr. Who my arss...

    .........



  5. #105
    Xtremely High Voltage Sparky's Avatar
    Join Date
    Mar 2006
    Location
    Ohio, USA
    Posts
    16,040
    Quote Originally Posted by perkam View Post
    Then let me tell you in advance, it will

    Perkam
    I do hope you're right *crosses fingers*
    The Cardboard Master
    Crunch with us, the XS WCG team
    Intel Core i7 2600k @ 4.5GHz, 16GB DDR3-1600, Radeon 7950 @ 1000/1250, Win 10 Pro x64

  6. #106
    Xtreme Member
    Join Date
    Jun 2006
    Location
    Portugal
    Posts
    117
    Quote Originally Posted by SparkyJJO View Post
    I do hope you're right *crosses fingers*
    I dont know if this is a stupid question that was answered before, if that´s the case excuse me, but how does Perkam knows

    that they will be better??


    Nevertheless, i´m eagerly waiting to see the Phenom results, and i hope Perkam is absolutely right..
    Sorry for my poor english.

  7. #107
    Xtreme Addict
    Join Date
    Jan 2006
    Posts
    1,321
    Quote Originally Posted by perkam View Post
    Then let me tell you in advance, it will

    Perkam
    not trying to be a party pooper... but its a pretty bold statement, and from all that's been said, its just a higher clocking process tweak. let me tell you, i will be ecstatic if its more.
    Core i7 920 3849B028 4.2ghz cooled by ek hf | 6gb stt ddr3 2100 | MSI HD6950 cf cooled by ek fc | Evga x58 e760 Classified | 120gb G.Skill Phoenix Pro | Modded Rocketfish case + 1200w toughpower | mcp 655 pump + mcr 320 + black ice pro II

  8. #108
    Xtreme Addict
    Join Date
    Jun 2002
    Location
    Ontario, Canada
    Posts
    1,782
    Any chance at some 2.6ghz love (or higher)?

    BTW...good job! Finally nice to see some overclocking with these chips.

  9. #109
    Xtreme Enthusiast
    Join Date
    Aug 2007
    Location
    Madison, TN
    Posts
    934
    Quote Originally Posted by cky2k6 View Post
    not trying to be a party pooper... but its a pretty bold statement, and from all that's been said, its just a higher clocking process tweak. let me tell you, i will be ecstatic if its more.
    I'm not sure I like the way you opined that.

  10. #110
    Banned
    Join Date
    Aug 2007
    Posts
    1,014
    Hmm strange

    Quad core

    look at that bios shot

    it says

    L1 = 512Kb, 128X4
    L2 = 2048kb , 512kb X4
    L3 = 2048kb
    is it me or isn't that wrong?

  11. #111
    Xtreme Member
    Join Date
    Sep 2005
    Location
    Slovakia
    Posts
    434
    L3 is shared 2MB so its correct
    My Rig X6 1055T|Crosshair IV Formula|8600GT|2x2024MB@1800|436GB storage

  12. #112
    Registered User
    Join Date
    Mar 2007
    Posts
    3
    You are wrong. Barca have 4x128KB L1 + 4x512KB L2 + 2 MB L3 shared cache.

  13. #113
    Phenom™
    Join Date
    Sep 2002
    Posts
    5,163
    Quote Originally Posted by BeardyMan View Post
    Hmm strange

    Quad core

    look at that bios shot

    it says

    L1 = 512Kb, 128X4
    L2 = 2048kb , 512kb X4
    L3 = 2048kb
    is it me or isn't that wrong?
    It's you The l3 cache is shared....

  14. #114
    Banned
    Join Date
    Aug 2007
    Posts
    1,014
    Quote Originally Posted by nesham View Post
    You are wrong. Barca have 4x128KB L1 + 4x512KB L2 + 2 MB L3 shared cache.
    LOL?

  15. #115
    Banned
    Join Date
    Aug 2007
    Posts
    1,014
    Quote Originally Posted by s7e9h3n View Post
    It's you The l3 cache is shared....
    No it's you

    This forum requires that you wait 30 seconds between posts. Please try again in 4 seconds.

  16. #116
    Xtreme Member
    Join Date
    Jun 2002
    Posts
    296
    Quote Originally Posted by PhilDoc View Post
    I'm not sure I like the way you opined that.



    o·pine (ō-pīn')

    v., o·pined, o·pin·ing, o·pines.

    v.tr.
    To state as an opinion.

    v.intr.
    To express an opinion: opined on the defendant's testimony.

    [Middle English opinen, from Old French opiner, from Latin opīnārī, to suppose.]
    Bruno's Junker
    OPTY 165 @ 2.9G
    ASSROCK 939Dual Sata2
    512mb Xerox Samsung PC2100
    512mb Corsair PC3200 Value Ram
    Ancient HDD, CDRW, DVD and Floppy
    Antique Gateway ATX Tower (cover not included)

  17. #117
    Xtreme Addict
    Join Date
    Jan 2006
    Posts
    1,321
    Quote Originally Posted by akaBruno View Post



    o·pine (ō-pīn')

    v., o·pined, o·pin·ing, o·pines.

    v.tr.
    To state as an opinion.

    v.intr.
    To express an opinion: opined on the defendant's testimony.

    [Middle English opinen, from Old French opiner, from Latin opīnārī, to suppose.]
    his usage of the word was actually correct thanks for the definition mr. chaucer
    Core i7 920 3849B028 4.2ghz cooled by ek hf | 6gb stt ddr3 2100 | MSI HD6950 cf cooled by ek fc | Evga x58 e760 Classified | 120gb G.Skill Phoenix Pro | Modded Rocketfish case + 1200w toughpower | mcp 655 pump + mcr 320 + black ice pro II

  18. #118
    Xtreme Member
    Join Date
    May 2005
    Location
    San Antonio, TX
    Posts
    297
    Thanks for the work Kyosen. Very much appreciated.

  19. #119
    Xtreme Member
    Join Date
    Jul 2007
    Posts
    112
    Does it clock any higher?

  20. #120
    Registered User
    Join Date
    Sep 2007
    Posts
    43
    funny the L3 runs at the speed of the memory controller,on Barcy thats 1.8 @2Ghz on Phenom its alot higher ! I think I saw 4Ghz somewhere

  21. #121
    Fused
    Join Date
    Dec 2003
    Location
    Malaysia
    Posts
    2,769
    so we can overclock l3 cache? wow..

  22. #122
    Xtreme Member
    Join Date
    Jun 2002
    Posts
    296
    Quote Originally Posted by tux08902 View Post
    Does it clock any higher?
    I doubt it will without some more juice pumpin. We're lookin at a NF4 here not a 790.

    Kyosen and Stephen are owed a debt of gratitude. They've taken crap chips to a level we haven't seen yet. On crap boards, I might add...

    As far as I know... these guys are the only ones on the internet that have given us a glimpse of the AMD future.

    Thanks guys,

    BRUNO
    Bruno's Junker
    OPTY 165 @ 2.9G
    ASSROCK 939Dual Sata2
    512mb Xerox Samsung PC2100
    512mb Corsair PC3200 Value Ram
    Ancient HDD, CDRW, DVD and Floppy
    Antique Gateway ATX Tower (cover not included)

  23. #123
    Xtreme Enthusiast
    Join Date
    Aug 2007
    Location
    Madison, TN
    Posts
    934
    Imho, chipsets have always been a major problem for AMD and have hampered performance. Whether their own or other manufactures. The NF4 did happen to be one of the better though. Lets hope the new AMD 790 finally gives AMD users a great one.

  24. #124
    Registered User
    Join Date
    Sep 2007
    Posts
    43
    Quote Originally Posted by akaBruno View Post
    I doubt it will without some more juice pumpin. We're lookin at a NF4 here not a 790.

    Kyosen and Stephen are owed a debt of gratitude. They've taken crap chips to a level we haven't seen yet. On crap boards, I might add...

    As far as I know... these guys are the only ones on the internet that have given us a glimpse of the AMD future.

    Thanks guys,

    BRUNO
    Hum mine are running quite well TY on SUSE 10.3

  25. #125
    Xtreme Member
    Join Date
    Apr 2004
    Location
    São Paulo / Brazil
    Posts
    421
    Quote Originally Posted by hipro5 View Post
    I think it only needs a single stage to find out that.....
    Fresh water should do it. At least my opty coldbugs at 18c @ 363MHz HTT.
    PC 1 PC 2
    [Intel Q9450 @ 3.733GHz][Intel E8400 @ 4GHz]
    [XFX nForce 780i 3 Way SLI][ASUS P5K Premium Wifi Black Pearl]
    [2x2GB G.Skill F2-8000CL5-2GBPQ][2x2GB Crucial Ballistix Tracer]
    [Visiontek HD4870 512MB][MSI 8800GT 512MB]
    [LG 2243W 21.5" FullHD LCD][Samsung T220 22" LCD]
    [Solytech 600W][SevenTeam V-Force 750W]

Page 5 of 16 FirstFirst ... 234567815 ... LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •