Results 551 to 575 of 5820

Thread: ASUS Maximus Formula SE

Threaded View

  1. #10
    Xtreme Cruncher
    Join Date
    Oct 2006
    Location
    Boston, Massachusetts
    Posts
    2,224
    Quote Originally Posted by Ace-a-Rue View Post
    pretty darn good, ChaosMinionX!
    These settings are 24/7 rock solid. 12hour SmallFFT, 12hour LargeFFT - then ran ram through Memtest86+ for 8hrs and its running a 24 hour Blend @priority 9 right now.

    BIOS 0505
    Extreme Tweaker
    Ai Overclock Tuner : Manual
    OC From CPU Level Up : AUTO
    CPU Ratio Control : Manual
    - Ratio CMOS Setting : 8
    FSB Frequency :450
    FSB Strap to North Bridge :AUTO
    PCI-E Frequency: 120
    DRAM Frequency: DDR2-900
    DRAM Command Rate : 2T
    DRAM Timing Control: Manual
    CAS# Latency : 4
    RAS# to CAS# Delay : 4
    RAS# Precharge : 4
    RAS# ActivateTime : 10
    RAS# to RAS# Delay : 3
    Row Refresh Cycle Time : 25
    Write Recovery Time : 3
    Read to Precharge Time : 3

    Read to Write Delay (S/D) : 7
    Write to Read Delay (S) : 3
    Write to Read Delay (D) : 5
    Read to Read Delay (S) : 4
    Read to Read Delay (D) : 6
    Write to Write Delay (S) : 4
    Write to Write Delay (D) : 6
    DRAM Static Read Control: DISABLED
    Ai Clock Twister : STRONG
    Transaction Booster : ENABLED (2)

    CPU Voltage : 1.4250v
    CPU PLL Voltage : 1.6v
    North Bridge Voltage : 1.49v
    DRAM Voltage : 2.18v
    FSB Termination Voltage : 1.4v
    South Bridge Voltage : AUTO
    Loadline Calibration : ENABLED
    CPU GTL Reference : .63x
    North Bridge GTL Reference : AUTO
    DDR2 Channel A REF Voltage : AUTO
    DDR2 Channel B REF Voltage : AUTO
    DDR2 Controller REF Voltage : AUTO
    SB 1.5V Voltage : AUTO

    NB LED Selection : NB Volt
    SB LED Selection : SB Volt
    CPU LED Selection : CPU VOlt
    Voltiminder LED : ENABLED

    CPU Spread Spectrum : Disabled
    PCIE Spread Spectrum : Disabled

    Also have 500x7 DDR2 1000/1250 4-4-4-10/5-5-5-15 working as well and stable.

    500x7 takes 1.45v and a slight increase on the NB/FSB voltages and ram takes 2.28v for DDR2 1250 stable at 5-5-5-15 with some pretty good subtimings. I got some screenies goin up soon as blend finishes for 450x8.

    Done nothing with 400x9 with DDR2 800 or 1000 but I would imagine its all the same, I like higher FSB's more

    A little test

    Heres the difference between tweaked subtimings and AUTO

    Untweaked (AUTO) and Transaction Booster to AUTO



    Tweaked with Transaction Booster to (2)



    The subtimings I have been using 7-3-5-4-6-4-6 have been great, real stable as well according to blend and memtest. I will be trying to lower the values some more in the coming days.

    -Cheers
    Last edited by ChaosMinionX; 10-18-2007 at 04:37 PM.

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •