sorry fellaz...
Haven't been able to post pic's because i can't find my camera...looked around the house all day..Rang up the mrs and she has it doh!!! I'll get it back 2morow and do a update...
I also got some goodies in the mail 2day included my new ram i got back from rma
cheers
Originally Posted by skinnee
No, I think he had a date tonight...
He and his EK Supreme are out for a night on the town!
UPDATE
ok i got my camera back.... took some pic's of my case how it is atm....
Added a mcr120 to the rear for my 3rd loop
3 acrylic bay reservoir's
i sanded and polished the middle divider to near mirror finish,i'm not finished with it yet waiting on some mother's billet polish in the mail (for a true mirror finish) this how it looks atm
As you can see it's mirror but i wasn't 100% satisfied (still cloudy)will how well it comes's up when the new polish arrives
Another full shot of case....
Bottom section has remained the same with the 2 triple rad's
Another shot of the middle section look at the middle section compared to the mobo tray...
Last one's you can just see the palm tree's reflecting off the middle divider
That all for now.....
I'm still a fair way off from finishing waiting on an order from petra's and a order from ek i'm guessing 2 weeks until arrive...
In the time being i still i have to cut the mobo tray for cable management and finish cutting my side panels for the modder's mesh
cheers
all comments and suggestions are welcome
fam
Last edited by disruptfam; 10-11-2007 at 08:36 PM.
No, I think he had a date tonight...
He and his EK Supreme are out for a night on the town!
See what you mean about the polishing. That molex and wires reflection is pretty good but just that bit of cloudy tinge over it.
That last shot of the rads really fooled your camera's auto settings. lol
You should have your Petra's things pretty quick but the other may drag on a bit. I hate the waiting.
It's funny comparing them. I find Petra's arrive in the time it takes PerfPC to dispatch. lol
Looks very impressive. Me likey
20 Logs on the fire for WCG:i7 920@2.8
X3220@3.0
X3220@2.4
E8400@4.05
E6600@2.4
Yeah that's why i wasn't 100% happy with the polishing job...see how the billet polish work's when it arrive's i may need to sand again if still cloudy...See what you mean about the polishing. That molex and wires reflection is pretty good but just that bit of cloudy tinge over it.
That last shot of the rads really fooled your camera's auto settings. lol
You should have your Petra's things pretty quick but the other may drag on a bit. I hate the waiting.
It's funny comparing them. I find Petra's arrive in the time it takes PerfPC to dispatch. lol
My camera ain't the best only cost 100bucks last yr...I took everyone's advice this time and actually took the pic's in natural light...
As for the postage time Aslong as i get my gear before the end of the month i'm happy...
Give's me time to get my panels and case done....
cheers jedda
No, I think he had a date tonight...
He and his EK Supreme are out for a night on the town!
thank youLooks very impressive. Me likey
No, I think he had a date tonight...
He and his EK Supreme are out for a night on the town!
Very impressived..... i-d like to see finished :d please post more photosªªª
iMac 24''
BNDMOD @ Cruz Alta (Cba.) Argentina
ThanksVery impressived..... i-d like to see finished :d please post more photosªªª
Will post more pic's as the build continues probably tomorow
No, I think he had a date tonight...
He and his EK Supreme are out for a night on the town!
The blue sleeving you've used on those ugly multi-colour multi-strand stuff Lian Li use off the front fittings will continue to unravel it's weave unless you heat shrink that end. Jaycar have blue in a size that will slip over the end fittings in blue or black.
wow! looking good
My Rig
CPU: Intel Core 2 Duo E6600 L626A175 3GHZ 1.30V real
RAM: Crucial Ballistix PC2-8500 stock speed and timings
Motherboard: Asus P5E X38 333MHZ FSB x9 multi
Video: Gigabyte 8800GTS 320mb stock speeds
Soundcard Creative Soundblaster Audigy 2 ZS
Hard Drives Seagate 250GB 7200.10 SATAII (boot) > Samsung HD501J 500GB SATAII (Storage)
Case: Lian Li PC-S80
Powersupply: Corsair HX620W 620watt
Optical: Samsung SH-S182D DVDRW 18x
Monitor: Asus MW221U 22" LCD
Mouse: Logitech CF G7
Keyboard: Logitech G15
Speakers: Logitech Z5500
The water cooling
CPU waterblock: Swiftech Apogee (original with custom top and mounting plate)
GPU waterblock: EK FC8800GTS Acrylic
Pump: Laing D5 Vario "3" speed setting
Radiator: Swiftech MCR220 w/ 120mm Yate Loons D12SM-12 running at 7V
Resevoir - Swiftech MCRES Micro - Pentison G11
thanks jedda can you link me to it please...The blue sleeving you've used on those ugly multi-colour multi-strand stuff Lian Li use off the front fittings will continue to unravel it's weave unless you heat shrink that end. Jaycar have blue in a size that will slip over the end fittings in blue or black.
Last edited by disruptfam; 10-12-2007 at 09:24 AM.
No, I think he had a date tonight...
He and his EK Supreme are out for a night on the town!
thanks for the nice commentswow! looking good
No, I think he had a date tonight...
He and his EK Supreme are out for a night on the town!
I ran into a problem today my dremel is acting up...
Taking it back tomorrow for a replacement it died when i was cutting into my panels....
More update's 2morow cheers
Last edited by disruptfam; 10-13-2007 at 04:50 AM.
No, I think he had a date tonight...
He and his EK Supreme are out for a night on the town!
Can't give you a complete link because of how their site works but here is their site and in Browse Products you want Wire and Cable and in the second line Heatshrink-Blue.
You can buy online or at a branch, Ipswich, Mermaid Beach, Underwood, Woolloongabah etc
cheers jedda
No, I think he had a date tonight...
He and his EK Supreme are out for a night on the town!
wow disrupt, another upgrade! looking nice!
Nikon User
Nikon D200 (Gone =( )/D300
Nikkor 18-105mm(Gone) // Nikkor 50mm 1.8 // Nikkor 55-200VR(Gone)
Tokina 12-24 // Tamron 90mm //
Manfrotto & Benro Legs // Benro Ballhead.
Current Lust = 80-200 Or 70-200VR1 <--Pending
No more computer parts for me... Well for now until I
really REALLY need to upgrade.
lol cheers matewow disrupt, another upgrade! looking nice!
No, I think he had a date tonight...
He and his EK Supreme are out for a night on the town!
UPDATE
ok i'm back received my petra order yesterday...
pump top, pump
d-tek nozzle's
pt_nuke
etc etc
here's some more pic's
did a trial mount with my fuzion....
added ac ryan mesh that i painted black to the drive bays and next to the mobo
cut my panels.... still need to clean up the edges... trial fitting...added modder's mesh that i painted black
i got my mother's billet polish the other day,polished again but it's still coming out cloudy... i may sand again... it's huge pita or i might add mesh to mid section or even black acrylic...if i dont get the results im after
full shot of case as it is atm (with flash)
that's all for now
comment are welcome
cheers
Waitng on my block's from ek... then build will be fully underway...
Last edited by disruptfam; 10-23-2007 at 07:29 PM.
No, I think he had a date tonight...
He and his EK Supreme are out for a night on the town!
Good progress! Keep the pics coming.
cheersGood progress! Keep the pics coming.
No, I think he had a date tonight...
He and his EK Supreme are out for a night on the town!
Question guy's
I don't know if i cbf (excuse the language) sanding again....
I have a few option's i could try...
1# add more ac ryan mesh to mid section....
2# buy some black acrylic to add to the mid section...
3# buy a mirror for the mid section....
4# sand and polish again and hope for the best...
What do you guys rekon????
No, I think he had a date tonight...
He and his EK Supreme are out for a night on the town!
If you decide on the acrylic let me know because I have a fair bit left over and I could hook you up.
Great work on the polishing btw
It's really your choice. Nothing is set in stone. You can always add plexi or polish more later on when your feeling more enthusiastic.
I think the slight cloud only shows in some pix and it looks quite good in others.
Problem with getting it perfect is keeping dust free for ever. You're not modding for a show but for your personal box and it makes sense to keep things practical.
yeah it get real dusty in my room..... i wish i had wood floors...Hmmm i dunnoIt's really your choice. Nothing is set in stone. You can always add plexi or polish more later on when your feeling more enthusiastic.
I think the slight cloud only shows in some pix and it looks quite good in others.
Problem with getting it perfect is keeping dust free for ever. You're not modding for a show but for your personal box and it makes sense to keep things practical.
when i put my finger next to metal it's pretty good but the further away is what i'm whining about...
I'll give it a couple more run's of polish and see how it goes...
No, I think he had a date tonight...
He and his EK Supreme are out for a night on the town!
Hey....
I can't decide which fan's i should use yate loon's with black fan grill's on antec blue led fans with black fan grill's what you guy's rekon??? (looks wise)
Performance wise they are about the same....
(note not a yate loon fan used any black fan to give you and idea)
No, I think he had a date tonight...
He and his EK Supreme are out for a night on the town!
Posting Permissions
Reply With Quote
Bookmarks