**Official DFI LanParty UT P35-T2R Review/Overclock/Guide Thread**

[Seanie's Show]

Anyone else running a Quad Core and 4 sticks of RAM on this board ???

Here's my dillema, Quad G0 Q6600 will do 3.7ghz, I also have 4 sticks of Crucial Ballistix Memory, 2 x 1gb (SPD flashed to PC8000) and 2 x 512gb (PC8000 Original SPD), giving me a total of 3gb, If I run my system with overclocked settings, and all 4 sticks it fails prime everytime, but not on different tests, always on the 16k test, I have discovered this by manually running all the tests that prime blend runs and it only ever fails on 16k, this is with all sorts of voltages tried, from 1.45-1.65 to the NB and 1.35-1.60v to the VTT and playing with the GTL's, always the same result.

However if I remove the 2 x 512gb PC8000 sticks it will blend forever, Right now its blending with minimum voltages at 3.6ghz @ 1.45v, memory at 1000mhz 4-4-4-12 @ 2.17v, FSB VTT @ 1.45v, NB @ 1.45v all other board voltages at Stocks.

On my DFI expert motherboard I always remeber the board would only post and boot with the RAM in a certain colour slots, cant remeber if it was the orange or the yellows, but I do remeber it wouldnt post or boot with the RAM in the other slots, is this still the case with DFI motherboards ? ie 2 slots work and 2 dont.

I see a 4gb kit on the horizion.