**Official DFI LanParty UT P35-T2R Review/Overclock/Guide Thread**

[Praz]

Some of your data doesn't match your screenshots. And i would be working on the NB voltage pretty quick.

[Booj]

@ dzeuk_ph

you temps are very high on all readings. if SG is saying cpu temp is 69deg, then coretemp is probably saying closer to 80deg, and IMO 2.4v+ vdimm is too high for 24/7, even if it still falls under warranted voltage. Also try prime large fft or blend test for stability. small ftt seems to be easier.

[dzeuk_ph]

@ dzeuk_ph

you temps are very high on all readings. if SG is saying cpu temp is 69deg, then coretemp is probably saying closer to 80deg, and IMO 2.4v+ vdimm is too high for 24/7, even if it still falls under warranted voltage. Also try prime large fft or blend test for stability. small ftt seems to be easier.

i'm on air.. checked Core temp, the highest reading on the core was very much consistent with SG.. sorry if i don't have a screen shot.. will post some soon.. BTW, that prime run was on blend..


@Praz,

sorry, copy paste the settings from my previous post, forgot the ratio and the memory speed..

lowered nb voltage to 1.65V and Vdimm to 2.42V.. just passed a 30 min occt ram test.. will test with prime..