Results 1 to 25 of 1126

Thread: Here's a little teaser....

Hybrid View

  1. #1
    Xtreme Addict
    Join Date
    Apr 2005
    Posts
    2,330
    I don't think anyone has anything capable of running it here. There are workstation boards, with onboard video. I think they're at best running XGI Volaris...

    3DM06 has nothing to do with new CPU architectures, and a Barcelona system will most likely not be indicative of either Phenom or QuadFX. Between the errata issue, ECC ram, and workstation chipsets there's little point in pursuing that one...

  2. #2
    I am Xtreme
    Join Date
    Aug 2003
    Posts
    7,825
    Quote Originally Posted by [XC] Kayin View Post
    I don't think anyone has anything capable of running it here. There are workstation boards, with onboard video. I think they're at best running XGI Volaris...

    3DM06 has nothing to do with new CPU architectures, and a Barcelona system will most likely not be indicative of either Phenom or QuadFX. Between the errata issue, ECC ram, and workstation chipsets there's little point in pursuing that one...
    All we want to see is the CPU test... barcelona will be the same thing as phenom. And what does this errata issue have to do with 06? And the chipset? Since when has chipset mattered with A64s?
    Phenom II 940 BE / ASUS M4A79 / HD5770 Crossfire
    3770mhz CPU 2600mhz NB | DDR1040 5-5-5-15 | 900/1250

  3. #3
    Xtreme Cruncher
    Join Date
    Jun 2006
    Posts
    6,215
    Quote Originally Posted by afireinside View Post
    All we want to see is the CPU test... barcelona will be the same thing as phenom. And what does this errata issue have to do with 06? And the chipset? Since when has chipset mattered with A64s?
    The issue is with the onboard graphics which doesn't meet the minimum specs in order to even run the bench on the K10 system.

  4. #4
    I am Xtreme
    Join Date
    Aug 2003
    Posts
    7,825
    Quote Originally Posted by informal View Post
    The issue is with the onboard graphics which doesn't meet the minimum specs in order to even run the bench on the K10 system.
    Get not integrated graphics?
    Phenom II 940 BE / ASUS M4A79 / HD5770 Crossfire
    3770mhz CPU 2600mhz NB | DDR1040 5-5-5-15 | 900/1250

  5. #5
    Banned
    Join Date
    Aug 2007
    Posts
    1,014
    Quote Originally Posted by afireinside View Post
    All we want to see is the CPU test... barcelona will be the same thing as phenom. And what does this errata issue have to do with 06? And the chipset? Since when has chipset mattered with A64s?
    no it's not.

  6. #6
    Xtreme X.I.P.
    Join Date
    Aug 2004
    Location
    Chile
    Posts
    4,151
    Quote Originally Posted by BeardyMan View Post
    no it's not.
    Mate stop being so close minded.

    K10 is the main arch, most that AMD can do on phenom to improove performance (IPC) is to increase the mem controler speed and that is it.

  7. #7
    Xtreme Enthusiast
    Join Date
    Dec 2005
    Posts
    746
    Quote Originally Posted by afireinside View Post
    Has ANYONE run 3d06 yet? This is pretty lame
    can't. 3992 doesn't support pcie graphics cards. the only board that is capable are the 3600-based boards (2915-E, 2932-E, etc.) right now and....good luck getting one.

    Quote Originally Posted by [XC] Kayin View Post
    I don't think anyone has anything capable of running it here. There are workstation boards, with onboard video. I think they're at best running XGI Volaris...

    3DM06 has nothing to do with new CPU architectures, and a Barcelona system will most likely not be indicative of either Phenom or QuadFX. Between the errata issue, ECC ram, and workstation chipsets there's little point in pursuing that one...
    ATI ES1000 chip here with a 32mb buffer chip. lemme tell ya...it ROCKS!

    Quote Originally Posted by cky2k6 View Post
    for amd's sake, i hope the chips and boards it sold to their actual customers function. cause, if their multi billion dollar clients are unhappy with how their new servers are running, amd is going to get eaten alive...
    i think the manufacturers that actually care about this are rolling their own (dell, sun, hp, ibm).

    Quote Originally Posted by PhilDoc View Post
    Not sure but I think that a lot of sales are for the entire server. I'm sure AMD will make sure they run before they get to the customer. They will probably also have a lot of drop in sales, just exchanging cpus. For those I'm sure the AMD field reps will be johnny on the spot and will undoubtably have made sure the configuration will run before they exchange cpus
    sure.

    Quote Originally Posted by afireinside View Post
    Get not integrated graphics?
    not possible at this time, but patience.

    Quote Originally Posted by metro.cl View Post
    Mate stop being so close minded.

    K10 is the main arch, most that AMD can do on phenom to improove performance (IPC) is to increase the mem controler speed and that is it.
    clock speed, memory controller speed, silicon fixes (which are minor percentage points, but, still....it does help), etc. platform DOES have an impact esp. as traffic is routed through the SB.

    dave
    Heat: 50 - 0 - 0 under "Argus333"

  8. #8
    Xtreme X.I.P.
    Join Date
    Aug 2004
    Location
    Chile
    Posts
    4,151
    Quote Originally Posted by dave_graham View Post
    can't. 3992 doesn't support pcie graphics cards. the only board that is capable are the 3600-based boards (2915-E, 2932-E, etc.) right now and....good luck getting one.



    ATI ES1000 chip here with a 32mb buffer chip. lemme tell ya...it ROCKS!



    i think the manufacturers that actually care about this are rolling their own (dell, sun, hp, ibm).



    sure.



    not possible at this time, but patience.



    clock speed, memory controller speed, silicon fixes (which are minor percentage points, but, still....it does help), etc. platform DOES have an impact esp. as traffic is routed through the SB.

    dave
    Dave i said IPC that doenst count clock speed

  9. #9
    Xtreme Enthusiast
    Join Date
    Dec 2005
    Posts
    746
    Quote Originally Posted by metro.cl View Post
    Dave i said IPC that doenst count clock speed
    IPC = Instructions PER CLOCK. so, given that clock speed is a necessary function of the Memory Controller speed, yeah, that'd be an important increase.

    dave
    Heat: 50 - 0 - 0 under "Argus333"

  10. #10
    Phenom™
    Join Date
    Sep 2002
    Posts
    5,163
    Quote Originally Posted by dave_graham View Post
    can't. 3992 doesn't support pcie graphics cards. the only board that is capable are the 3600-based boards (2915-E, 2932-E, etc.) right now and....good luck getting one.
    Wait a sec, doesn't your mobo have 2 pci-e slots? And they both don't support video cards?

  11. #11
    Xtreme Mentor
    Join Date
    May 2007
    Posts
    2,792
    Quote Originally Posted by s7e9h3n View Post
    Wait a sec, doesn't your mobo have 2 pci-e slots? And they both don't support video cards?
    Thats what the specs suggest: http://www.tyan.com/product_board_detail.aspx?pid=235


  12. #12
    Live Long And Overclock
    Join Date
    Sep 2004
    Posts
    14,058
    Quote Originally Posted by metro.cl View Post
    Mate stop being so close minded.

    K10 is the main arch, most that AMD can do on phenom to improove performance (IPC) is to increase the mem controler speed and that is it.
    I thought Phenom (desktop) is clocked at 2.0ghz-2.6ghz+ ??

    Perkam

  13. #13
    Xtreme Mentor
    Join Date
    Nov 2005
    Location
    Devon
    Posts
    3,437
    tsuehpsyde your Everest latency test is amazing! My personal best on AM2 platform with DDR2 1000MHZ 4-4-4-12 was around 37.9ns!
    On the other hand SiSoft Sandra test are a bit disappointing and from memory tests I'm thinking your Windows doesn't know what NUMA is .

    Of course many thanks for sharing! Every input is important, even the one witch bad results!
    RiG1: Ryzen 7 1700 @4.0GHz 1.39V, Asus X370 Prime, G.Skill RipJaws 2x8GB 3200MHz CL14 Samsung B-die, TuL Vega 56 Stock, Samsung SS805 100GB SLC SDD (OS Drive) + 512GB Evo 850 SSD (2nd OS Drive) + 3TB Seagate + 1TB Seagate, BeQuiet PowerZone 1000W

    RiG2: HTPC AMD A10-7850K APU, 2x8GB Kingstone HyperX 2400C12, AsRock FM2A88M Extreme4+, 128GB SSD + 640GB Samsung 7200, LG Blu-ray Recorder, Thermaltake BACH, Hiper 4M880 880W PSU

    SmartPhone Samsung Galaxy S7 EDGE
    XBONE paired with 55'' Samsung LED 3D TV

  14. #14
    Banned
    Join Date
    Aug 2007
    Posts
    1,014
    Quote Originally Posted by metro.cl View Post
    Mate stop being so close minded.

    K10 is the main arch, most that AMD can do on phenom to improove performance (IPC) is to increase the mem controler speed and that is it.
    I'm not your mate

    and phenom will be different vs this current processor, launch clocks, launch date should say enough nuf said

    btw your interpretation was wrong.

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •