Quote Originally Posted by AstroCreep View Post
Well, first, I don't know that the 8800GTS uses 26a all by it's lonesome; I think that's a very liberal base eVGA recommends.
I myself have a 3x 12v rail system with a cumulative 38a, which isn't much more than yours and that single rail is better (less 'wasted' energy).

While uGuru is great, I don't know how much I would trust if for straight rail ratings; do you have a voltmeter? If so, measure your 12v line directly and see how it looks.

Also might want to consider updating the BIOS to the newest official at very least.
I was going by the recommendations for the 26a. I know something is meesing with my attempts buy I can't seem to narrow it down. I am already running the 11 bios but is does weird things with my memory. If I set the mem ratio at default it goes to DDR1200. 1:1 gives what it should as do 1:1.2. This all stared after reseating my hs last Saturday. I would swear that is way better before that. On Ace's recommendation I even tried pulling all the power and the battery for 15-20 minutes on a reset but that didn't help. I may just try a reflash to see what happens. As far as checking voltages I will have to find my 10' DVI cable in order to get the case out to a point I can do that. I am really begining to think I had this in a Tech Station instead of the Stacker until I get things sorted out. I am going to also try hooking up the 4-pin molex just to eliminate that from the equation.