Water Cooled Case Gallery

[Yozzman]

Guess this should go in here now its just about done

System Spec:
Tyan Tiger K8WE S2877ANRF
2x AMD Opteron 265 dual core SKT 940 Retail (1.8Ghz-0.9nm-2Mb)
4x 512GB OCZ 3200 EL DDR ECC Reg / Dual Channel
Gainwards 8800GTX Ultra Golden Sample
2x 74GB Raptors

Watercooling:
2x Danger Den TDX A64 Blocks
Danger Den NV8800 Block
Laing DDC 10watt - Alphacool Dual Plexi Res
HWLabs Custom Made GTX X-Flow
2x Yate Loon D12SL-12
Tygon Hose
Fesser One Liquid

Nice paintjob man!!!

Only missing the wires

[coolrmaster]

Crappy XION case, needs a dustin. But hey, got it really cheap (10 dollars) so I said whatever, and took it.

Oh, and first post on XS!

Note my ghetto round IDE cables and ghetto radiator air duct. Electrical tape for the win yo!

ghetto case shlome

that tape is freakin cool bro

[hobbes70790]

well since i killed my EVGA 680i A1 board last night, i had to order a new one (Asus P5K Deluxe) which will be here tomorrow afternoon, so i spent tonight getting all my WC gear ready to slap on there and thought i would take some photos to share. enjoy.

(comments more than welcome)


Full view

D-Tek Fuzion

EK Multioption

Lower part

Side shot

EK-FC8800 (sorry for the blurry )

And the Coolsleeves

well thats it for now, more pictures tomorrow with the full asembly if anyone wants

[Grinch]

well since i killed my EVGA 680i A1 board last night, i had to order a new one (Asus P5K Deluxe) which will be here tomorrow afternoon, so i spent tonight getting all my WC gear ready to slap on there and thought i would take some photos to share. enjoy.

(comments more than welcome)


Full view

D-Tek Fuzion

EK Multioption

Lower part

Side shot

EK-FC8800 (sorry for the blurry )

And the Coolsleeves

well thats it for now, more pictures tomorrow with the full asembly if anyone wants

to Xtremesystems!

Nice looking setup you have there..

[septim]

hobbes welcome to XS, pics are looking good, almost good enough to drink your 4seasons there, hehehe...

[louie101086]

wow hobbes niccceeeee how many uv lights you using and what type

[hobbes70790]

wow hobbes niccceeeee how many uv lights you using and what type

haha total of 6 12" uv ccfls, and they are all logysis methinks..woulda got better but got all 3 dual sets on clearance for $2 a set

[louie101086]

$2 dollars wow where at

[hobbes70790]

$2 dollars wow where at

at voyuermods about 1-2years ago.. i dunno.
they dont exist any more, they changed to moddersmart, they dont carry the greatest selection of stuff, but you can usually snag some sweet deals now and again

[louie101086]

o ok thanks alot i will check them out

[coolrmaster]

well since i killed my EVGA 680i A1 board last night, i had to order a new one (Asus P5K Deluxe) which will be here tomorrow afternoon

WHY BUY A NEW ONE WHEN THE EVGA 680I A1 HAS A LIFETIME WARRANTY?

AS FAR AS THE RIG I'LL HOLD MY 2 CENTS UNTIL U GET ALL THE PIECES INSTEAD OF A-HALFA-PC. . . . .

[crackbag]

Very nice case, can you show me the back of cables.
Thanks a lot.-

i can show u the cuts i made

[Steffen]

[tiro_uspsss]

@ Steffen: the blue hue in ur case reminds me of a disco - i like it!

[whattheschmidt]

very nice and clean steffen, but isn't it bad for your inlet to be facing down like that?

[Steffen]

No Problems so far

[noel82]

for steffen: really nice setup, i like the Aerocool fans and their light inside

[hobbes70790]

WHY BUY A NEW ONE WHEN THE EVGA 680I A1 HAS A LIFETIME WARRANTY?

i dont think lifetime warranties cover me chipping a corner off of the chipset

[YugenM]

i dont think lifetime warranties cover me chipping a corner off of the chipset

I've seen EVGA RMA stuff in worse condition

[hobbes70790]

I've seen EVGA RMA stuff in worse condition

hmm maybe ill give it a shot, i guess the worst that could happen is a no, and it would still be dead. and if they do send it back, ill sell it for whatever i can get

[stormshadow]

hmmm... horizontally mounted ek res...
nice.

[ranker]

hmm maybe ill give it a shot, i guess the worst that could happen is a no, and it would still be dead. and if they do send it back, ill sell it for whatever i can get

Trust me. Evga will take back anything that remotely resembles a board.

I've sent back a board that was completely fried with burn marks and nasty insulation coating (with a pink color) all over it with some of the suicide shots a neighbor and I did with LN2.

On top of that, an associate of mine had his computer chucked out the window after an argument with the lady. His board has snapped in two. He sent it back...and got a successful RMA.

I'm beginning to wonder what it would take for them to deny an RMA...

Maybe I'll send back 2/3's of a board the next time around.

[k00lance]

Trust me. Evga will take back anything that remotely resembles a board.

I've sent back a board that was completely fried with burn marks and nasty insulation coating (with a pink color) all over it with some of the suicide shots a neighbor and I did with LN2.

On top of that, an associate of mine had his computer chucked out the window after an argument with the lady. His board has snapped in two. He sent it back...and got a successful RMA.

I'm beginning to wonder what it would take for them to deny an RMA...

Maybe I'll send back 2/3's of a board the next time around.

You must be special.
Someone was complaning he was charged for a broken socket pin and posted here and there.

[ranker]

You must be special.
Someone was complaning he was charged for a broken socket pin and posted here and there.

I won't deny it but that's a strange occurrence. I've never heard of anyone being charged as long as they sent the product back in the manner as asked, especially over a bent socket. He could have claimed it came like that in the first place and for all they know they'd have to accept his claim as is.

[coolrmaster]

evga has the best customer service and exchange policies bar none

they exchanged for free the original 680i board with revision A1 just so peeps like myself could overclock the quadcore's fsb to 400 and beyond

my A1 eventually died and guess what, they sent me another board