Water Cooled Case Gallery

[Bail_w]

i think that a 120.2 will fit on the top of the case, im willing to sacrifice 2 drive bays if needed.

i think it has room, look at this http://www.systemcooling.com/lian_li_pc-7b-07.html

Swiftech MCR220 with fans inside of the case will fit.

[zhangmaster12]

nice! that the rad that i have. So 120.2 mcr on top and i 120.1 bip in front would work?

[nitteo]

Finished installing my watercooling system: My FULL BUILD LOG WITH PICS.









I am going to redo the "t"s so that they do not impede flow tonight, like this:

[YugenM]

pity about the dent in your PA, but that's one heck of an awesome build! I like what you did with the shroud, although I don't know whether it's more effective that way or not.

[ranker]

pity about the dent in your PA, but that's one heck of an awesome build! I like what you did with the shroud, although I don't know whether it's more effective that way or not.

He's actually using the shroud incorrectly.

Nitteo: The fans need to be mounted on the outside of the shroud. The purpose of the shroud is to eliminate dead spots from having the fans directly attached to the radiator itself.

[nitteo]

He's actually using the shroud incorrectly.

Nitteo: The fans need to be mounted on the outside of the shroud. The purpose of the shroud is to eliminate dead spots from having the fans directly attached to the radiator itself.

I know it supposed to be fan>shroud>rad, but I have to sacrifice performance (for now) to get it to fit underneath the "cupboard" after I use the comp. Notice I already took off the case's feet.

When I tear those down Ill place the fans ontop...here is a pic of my deskspace I have to work with:

[ranker]

I know it supposed to be fan>shroud>rad, but I have to sacrifice performance (for now) to get it to fit underneath the "cupboard" after I use the comp. Notice I already took off the case's feet.

When I tear those down Ill place the fans ontop...here is a pic of my deskspace I have to work with:

Gotcha. Looks great otherwise though. Its the first Fatality Zalman build I've seen.

[Mankz_91]

Finished.







Nothing more to say or do!

[YugenM]

He's actually using the shroud incorrectly.

Nitteo: The fans need to be mounted on the outside of the shroud. The purpose of the shroud is to eliminate dead spots from having the fans directly attached to the radiator itself.

"...although I don't know whether it's more effective that way or not."

Didn't know whether the shroud was doing anything, which is why I added that sentence

[aiya]

Finished.





Nothing more to say or do!

more pics with the side panel off plz

[Capt Proton]

"...although I don't know whether it's more effective that way or not."

Didn't know whether the shroud was doing anything, which is why I added that sentence

The shroud may not be affecting much, but, I bet that cupboard being so close is. I would venture that it is restricting the air flow through the fan, pressure build up.

[coolrmaster]

i think that a 120.2 will fit on the top of the case, im willing to sacrifice 2 drive bays if needed.

i think it has room, look at this http://www.systemcooling.com/lian_li_pc-7b-07.html

copy that, good luck and looking forward to seeing it when completed

[crackbag]

heres mine

[owcraftsman]

Wow superb cabling and extremely clean and neat implementation head to toe
I have never seen better.
The only change for me would be round IDE & FDD cables but you even made that sweet.
WoW

[crackbag]

Wow superb cabling and extremely clean and neat implementation head to toe
I have never seen better.
The only change for me would be round IDE & FDD cables but you even made that sweet.
WoW

lol thx alot! check it out here a few more pics http://www.xtremesystems.org/forums/...d.php?t=148736

[Shlomo]

Crappy XION case, needs a dustin. But hey, got it really cheap (10 dollars) so I said whatever, and took it.

Oh, and first post on XS!

Note my ghetto round IDE cables and ghetto radiator air duct. Electrical tape for the win yo!

[septim]

crackbag good to see you have your pc up and running, and i would add a very clean finished you did to it.

shlomo welcome to XS liquid cooling...

[coolmiester]

Guess this should go in here now its just about done

System Spec:
Tyan Tiger K8WE S2877ANRF
2x AMD Opteron 265 dual core SKT 940 Retail (1.8Ghz-0.9nm-2Mb)
4x 512GB OCZ 3200 EL DDR ECC Reg / Dual Channel
Gainwards 8800GTX Ultra Golden Sample
2x 74GB Raptors

Watercooling:
2x Danger Den TDX A64 Blocks
Danger Den NV8800 Block
Laing DDC 10watt - Alphacool Dual Plexi Res
HWLabs Custom Made GTX X-Flow
2x Yate Loon D12SL-12
Tygon Hose
Fesser One Liquid

[Dark Prodigy]

That is as COOL as the other side of the pillow my man. Solid.

Did you finish wiring it?

[Grinch]

nitteo



did you take this with wideangle lens or something? maybe a fisheye?

[italian soldier]

Guess this should go in here now its just about done

System Spec:
Tyan Tiger K8WE S2877ANRF
2x AMD Opteron 265 dual core SKT 940 Retail (1.8Ghz-0.9nm-2Mb)
4x 512GB OCZ 3200 EL DDR ECC Reg / Dual Channel
Gainwards 8800GTX Ultra Golden Sample
2x 74GB Raptors

Watercooling:
2x Danger Den TDX A64 Blocks
Danger Den NV8800 Block
Laing DDC 10watt - Alphacool Dual Plexi Res
HWLabs Custom Made GTX X-Flow
2x Yate Loon D12SL-12
Tygon Hose
Fesser One Liquid

"Che spettacolo"

Valentino Rossy rulez!!!

[manu]

heres mine

Very nice case, can you show me the back of cables.
Thanks a lot.-

[nitteo]

nitteo



did you take this with wideangle lens or something? maybe a fisheye?

Yup, D200 with a Tokina 10-17mm lens, this was at 17mm though. Here is a shot on 10mm.



go 'fins!

[Grinch]

cool as hell looking!

[dnb#]

Nitteo, you have the same phone as me!
HTC s620