Intel S1155 Core i7 2600K Quad Core CPU
Gigabyte GA-Z68X-UD3R-B3 Socket 1155
DDR3 16GB (4x4G) G.Skill Ripjaws 1600MHz RAM Kit
128GB Crucial M4 2.5" SATA 3 Solid State Drive (SSD)
2TB Western Digital BLACK edition 64M SATA HDD
1TB Western Digital Green 64M SATA HDD
NVIDIA GTX560 1GB Gigabyte OC PCIe Video Card
23.6" BenQ XL2410T 3D LED Monitor
CoolerMaster RC-922M-KKN1 HAF Mid ATX Case Black
Thermaltake 775 Watt Toughpower XT ATX PSU
LG BH10LS30 Blu-Ray Writer
Corsair Hydro H70 High Performance Liquid Cooling System
E6400 L624A768 @ 3600mhz 1.48V
Biostar TP35D2-A7
2x1GB Micron D9JKH, 2x1GB OCZ Gold DDR2-1100
1x250GB WD SATAII 2x120GB Maxtor IDE 1x200GB
EVGA 8800GTS 512MB stock 799/1998/2075
MCW350, Apogee, 120.1 Swiftech Rad
Antec Smartpower 500W
BenQ DVDrw
Logitech z-5300e
Intel S1155 Core i7 2600K Quad Core CPU
Gigabyte GA-Z68X-UD3R-B3 Socket 1155
DDR3 16GB (4x4G) G.Skill Ripjaws 1600MHz RAM Kit
128GB Crucial M4 2.5" SATA 3 Solid State Drive (SSD)
2TB Western Digital BLACK edition 64M SATA HDD
1TB Western Digital Green 64M SATA HDD
NVIDIA GTX560 1GB Gigabyte OC PCIe Video Card
23.6" BenQ XL2410T 3D LED Monitor
CoolerMaster RC-922M-KKN1 HAF Mid ATX Case Black
Thermaltake 775 Watt Toughpower XT ATX PSU
LG BH10LS30 Blu-Ray Writer
Corsair Hydro H70 High Performance Liquid Cooling System
Loads of New bios out from gigabyte today. DQ6 F11 Final. anyone care to decode what super IO means ?
cpu temps changed now more like coretemp.
Last edited by Ar3s; 06-12-2007 at 04:21 PM.
Overclocked Keyboards
E8400 8x500=4000 | ABIT IP35-E
2x2GB Tracer PC2-6400 1:1 500MHz 5-5-5-15 2.0V
Galaxy 8800GT 800/2000/1100 1.3V | 80GB X25-M G2 + 1.5TB 7200.11 | XFiXG
Fuzion | MCW60 | DDC2+Petra | Coolrad22T+BIP1
Merom 13x133=1733 1MB L2 0.950V
glad to see another BIOS. Will test tonight
edit: where do you see F11 bios for P35-DQ6?
Last edited by irev210; 06-12-2007 at 10:58 AM.
CPU: Intel CORE 2 Duo E6550 @ 3.6GHz w/ 1.29vcore (517*7)
Motherboard:
Gigabyte P35-DQ6
Memory:
Crucial 8500's
Video:
Nvidia 8800GTX
PSU:
Zippy 700W (fan modded of course)
FX8350 @ 4.0Ghz | 32GB @ DDR3-1200 4-4-4-12 | Asus 990FXA @ 1400Mhz | AMD HD5870 Eyefinity | XFX750W | 6 x 128GB Sandisk Extreme RAID0 @ Aerca 1882ix with 4GB DRAM
eXceed TJ07 worklog/build
Wow, I'm loving this F12 bios. No cold boots, I can now overclock at 3.2ghz with 1.4v. I used to do 3.2ghz at 1.44v. I use e4300 and ds3 3.3
what super IO?!
www.HotOverclock.com Founder & Editor in Chief
---------------------
Upgrading to X58 ...
Q6600 G0 @ 3.8GHz FSB 423MHz w/Swiftech H2O 120 Compact Dual 120mm fan Last OC Details Here
abit IX38 QuadGT Rev1.0 (X38 Rev.01)
4x1GB Patriot +SL PC2-6400 Based on Aeneon AET760UD00-25D Chips! @ 1:1 1000MHz 5-4-4-8 2.0v
Sapphire Radeon HD 4850 A2 Normal Edition @ Core 820MHz Mem 2100MHz
Display 19" LG FLATRON L1960TR LCD Contrast 3000:1 Response Time 2ms Lightning Fast!! w/f-Engine Chip and DFC Technology
HDD 250GB Seagate Barracuda 7200.10 ST3250820AS
HDD 120GB Maxtor Max.10 6L120M0
PSU Zalman ZM1000-HP 1000 Watt Six 12v Rail and Dual Seperate Board
A4Tech X7 Gaming Mouse X-750BF Dual Laser Engin w/2500DPI
More about my Memory : it can do 950MHz 4-4-4-8 2.0v Stable and 1100MHz 5-7-7-12 2.2v Stable and 1200MHz 6-8-8-21 2.3v not Stable!
E8400 8x500=4000 | ABIT IP35-E
2x2GB Tracer PC2-6400 1:1 500MHz 5-5-5-15 2.0V
Galaxy 8800GT 800/2000/1100 1.3V | 80GB X25-M G2 + 1.5TB 7200.11 | XFiXG
Fuzion | MCW60 | DDC2+Petra | Coolrad22T+BIP1
Merom 13x133=1733 1MB L2 0.950V
Wow, my max cas 3 clock is only 50mhz higher than my max cas 5 clocks!
vMCH: 1.68V vDIMM 2.82V
E6400 L624A768 @ 3600mhz 1.48V
Biostar TP35D2-A7
2x1GB Micron D9JKH, 2x1GB OCZ Gold DDR2-1100
1x250GB WD SATAII 2x120GB Maxtor IDE 1x200GB
EVGA 8800GTS 512MB stock 799/1998/2075
MCW350, Apogee, 120.1 Swiftech Rad
Antec Smartpower 500W
BenQ DVDrw
Logitech z-5300e
Flashed ti DS4 F10 everything is ok but I dont try any OC yet
Updates in F10 :
1.QFlash version updated to 2.02
2.fixed 120mm CPU fan issue finally
www.HotOverclock.com Founder & Editor in Chief
---------------------
Upgrading to X58 ...
Q6600 G0 @ 3.8GHz FSB 423MHz w/Swiftech H2O 120 Compact Dual 120mm fan Last OC Details Here
abit IX38 QuadGT Rev1.0 (X38 Rev.01)
4x1GB Patriot +SL PC2-6400 Based on Aeneon AET760UD00-25D Chips! @ 1:1 1000MHz 5-4-4-8 2.0v
Sapphire Radeon HD 4850 A2 Normal Edition @ Core 820MHz Mem 2100MHz
Display 19" LG FLATRON L1960TR LCD Contrast 3000:1 Response Time 2ms Lightning Fast!! w/f-Engine Chip and DFC Technology
HDD 250GB Seagate Barracuda 7200.10 ST3250820AS
HDD 120GB Maxtor Max.10 6L120M0
PSU Zalman ZM1000-HP 1000 Watt Six 12v Rail and Dual Seperate Board
A4Tech X7 Gaming Mouse X-750BF Dual Laser Engin w/2500DPI
More about my Memory : it can do 950MHz 4-4-4-8 2.0v Stable and 1100MHz 5-7-7-12 2.2v Stable and 1200MHz 6-8-8-21 2.3v not Stable!
Select Load optimised options... saved...flash F10 bios...reboot...no boot...short cmos...no boot...take out everything...install back...no boot...DS4 going RMA...Asus P5K coming Monday...End.
Main rig: Asus P5K Vanilla 0603 | Intel Core2Quad L727A Q6600@3.5ghz FSB500x7@1.375V w Thermaltake Bigwater 745 | G.Skill GBHZ 6400DDR2 1GB*2 500mhz 4-4-4-9@2.4V w OCZ XTC Cooler | XFX 7900GT@560mhz/1.8ghz DDR3 256MB w Zalman VF900-Cu LED | WD Raptor 150GB Sata + Seagate 320GB Sata2 | Pioneer DVRA11 + Samsung SH-S182D | Coolermaster Centurion 5 | Coolermaster Real 450W | Dell 1707FP
Inputs: Saitek Eclipse II Illuminated Keyboard | Razer Deathadder
Backup: HP TX1005au Tablet Pc | AMD Turion 64 X2 TL-56(1.8GHz/1MB) | Kingston DDR2 1GB*2 5-5-5-12 | Geforce GO 6150 334MB | HDD Sata 120GB | LightScribe Super Multi 8X DVD+/-RW w/Double Layer | 12.1" WXGA BrightView w/Integrated Touch-screen | OS:Windows Vista Home Premium (32-bit)
i've flashed F12 bios for DS3 rev 3.3
C1 is not working for me while overclocking , also the other cpu option in the ctrl + F1 menu (where you can select cruise -- full thrust) is still making my pc hang .
Cpu still needs same voltage as before . memory +0.4 still makes my board go into a boot loop .
So basically no improvements that i can see in overcloking nor stability .
Why isn't gigabyte not giving a changelog along with a new bios , at least then you can go look if it's better or not .
I mean super I/O ?
Main rig 1: Corsair Carbide 400R 4x120mm Papst 4412GL - 1x120mm Noctua NF-12P -!- PC Power&Cooling Silencer MK III 750W Semi-Passive PSU -!- Gigabyte Z97X-UD5H -!- Intel i7 4790K -!- Swiftech H220 pull 2x Papst 4412 F/2GP -!- 4x4gb Crucial Ballistix Tactical 1866Mhz CAS9 1.5V (D9PFJ) -!- 1Tb Samsung 840 EVO SSD -!- AMD RX 480 to come -!- Windows 10 pro x64 -!- Samsung S27A850D 27" + Samsung 2443BW 24" -!- Sennheiser HD590 -!- Logitech G19 -!- Microsoft Sidewinder Mouse -!- Fragpedal -!- Eaton Ellipse MAX 1500 UPS .
Sounds like issues with your board. I disable C1 so cannot comment on that. I have no problems with control-F1, never had. Also, using .4 here I have no problems with that either. I was able to drop from 1.47v to 1.45v at
3616 overall, great bios no problems and same overclock with less volts!
I agree that they need a more comprehensive changelog.
i7-2600k @ 4.8Ghz 1.38v L044A892
ASUS P8P67 LGA
16GB G.Skill Rip Jaws DDR3 1600Mhz Memory
1/2" ID Masterkleer, Swiftech MCP-655, Thermochill PA120.3 Rad, XSPC Rasa, MCW-60
Cooler Master UCP 1100 Watt PSU
GTX 680 1300/7000
Lian Li PC V-2000
Flash to F10 after 4 day I noticed that CPU Temp increased 4-5C in idle and load C1E EIST TM2 is enabled ... no OC test yet ... I think its bad BIOS!
www.HotOverclock.com Founder & Editor in Chief
---------------------
Upgrading to X58 ...
Q6600 G0 @ 3.8GHz FSB 423MHz w/Swiftech H2O 120 Compact Dual 120mm fan Last OC Details Here
abit IX38 QuadGT Rev1.0 (X38 Rev.01)
4x1GB Patriot +SL PC2-6400 Based on Aeneon AET760UD00-25D Chips! @ 1:1 1000MHz 5-4-4-8 2.0v
Sapphire Radeon HD 4850 A2 Normal Edition @ Core 820MHz Mem 2100MHz
Display 19" LG FLATRON L1960TR LCD Contrast 3000:1 Response Time 2ms Lightning Fast!! w/f-Engine Chip and DFC Technology
HDD 250GB Seagate Barracuda 7200.10 ST3250820AS
HDD 120GB Maxtor Max.10 6L120M0
PSU Zalman ZM1000-HP 1000 Watt Six 12v Rail and Dual Seperate Board
A4Tech X7 Gaming Mouse X-750BF Dual Laser Engin w/2500DPI
More about my Memory : it can do 950MHz 4-4-4-8 2.0v Stable and 1100MHz 5-7-7-12 2.2v Stable and 1200MHz 6-8-8-21 2.3v not Stable!
www.HotOverclock.com Founder & Editor in Chief
---------------------
Upgrading to X58 ...
Q6600 G0 @ 3.8GHz FSB 423MHz w/Swiftech H2O 120 Compact Dual 120mm fan Last OC Details Here
abit IX38 QuadGT Rev1.0 (X38 Rev.01)
4x1GB Patriot +SL PC2-6400 Based on Aeneon AET760UD00-25D Chips! @ 1:1 1000MHz 5-4-4-8 2.0v
Sapphire Radeon HD 4850 A2 Normal Edition @ Core 820MHz Mem 2100MHz
Display 19" LG FLATRON L1960TR LCD Contrast 3000:1 Response Time 2ms Lightning Fast!! w/f-Engine Chip and DFC Technology
HDD 250GB Seagate Barracuda 7200.10 ST3250820AS
HDD 120GB Maxtor Max.10 6L120M0
PSU Zalman ZM1000-HP 1000 Watt Six 12v Rail and Dual Seperate Board
A4Tech X7 Gaming Mouse X-750BF Dual Laser Engin w/2500DPI
More about my Memory : it can do 950MHz 4-4-4-8 2.0v Stable and 1100MHz 5-7-7-12 2.2v Stable and 1200MHz 6-8-8-21 2.3v not Stable!
Just updated from F3 to F10 on a Gigabyte DS4. Whoa what a diffrence, theres so many new options!!
Im trying to search around on XS, but if anyone has the link to hand IIRC there was a Gigabyte DSx tweaking thread somewhere...?
Cheers, Cool_Dude.
<<< fear.teh.squirrel
Intel Core 2 Quad Q6600@3528MHz (9x 392MHz, 1.40V) (2nd Intel in my life)
Gigabyte GA-965P-DS4 rev3.3 F10
2x 1GB Patriot PDC22G6400LLK @1044MHz
Ati X1800GTO VIVO 256MB
Seagate Barracuda 7200.10 320GB SATA2
Seagate Barracuda ES 320GB SATA2
Toshiba SD-M1612
Asus 1608P2S@Pioneer DVR110
Tacens ValeoSmart 560W
Samsung 204B
Last edited by HamidFULL; 06-19-2007 at 12:48 PM.
www.HotOverclock.com Founder & Editor in Chief
---------------------
Upgrading to X58 ...
Q6600 G0 @ 3.8GHz FSB 423MHz w/Swiftech H2O 120 Compact Dual 120mm fan Last OC Details Here
abit IX38 QuadGT Rev1.0 (X38 Rev.01)
4x1GB Patriot +SL PC2-6400 Based on Aeneon AET760UD00-25D Chips! @ 1:1 1000MHz 5-4-4-8 2.0v
Sapphire Radeon HD 4850 A2 Normal Edition @ Core 820MHz Mem 2100MHz
Display 19" LG FLATRON L1960TR LCD Contrast 3000:1 Response Time 2ms Lightning Fast!! w/f-Engine Chip and DFC Technology
HDD 250GB Seagate Barracuda 7200.10 ST3250820AS
HDD 120GB Maxtor Max.10 6L120M0
PSU Zalman ZM1000-HP 1000 Watt Six 12v Rail and Dual Seperate Board
A4Tech X7 Gaming Mouse X-750BF Dual Laser Engin w/2500DPI
More about my Memory : it can do 950MHz 4-4-4-8 2.0v Stable and 1100MHz 5-7-7-12 2.2v Stable and 1200MHz 6-8-8-21 2.3v not Stable!
www.HotOverclock.com Founder & Editor in Chief
---------------------
Upgrading to X58 ...
Q6600 G0 @ 3.8GHz FSB 423MHz w/Swiftech H2O 120 Compact Dual 120mm fan Last OC Details Here
abit IX38 QuadGT Rev1.0 (X38 Rev.01)
4x1GB Patriot +SL PC2-6400 Based on Aeneon AET760UD00-25D Chips! @ 1:1 1000MHz 5-4-4-8 2.0v
Sapphire Radeon HD 4850 A2 Normal Edition @ Core 820MHz Mem 2100MHz
Display 19" LG FLATRON L1960TR LCD Contrast 3000:1 Response Time 2ms Lightning Fast!! w/f-Engine Chip and DFC Technology
HDD 250GB Seagate Barracuda 7200.10 ST3250820AS
HDD 120GB Maxtor Max.10 6L120M0
PSU Zalman ZM1000-HP 1000 Watt Six 12v Rail and Dual Seperate Board
A4Tech X7 Gaming Mouse X-750BF Dual Laser Engin w/2500DPI
More about my Memory : it can do 950MHz 4-4-4-8 2.0v Stable and 1100MHz 5-7-7-12 2.2v Stable and 1200MHz 6-8-8-21 2.3v not Stable!
well, I had some problem with boot in f8. I have 2 ata100 HDD and 2 ata DVDs so I have extra pci ide ata100 card. F8 very often stop before boot. I think it has problem with recognizing hdds attached by pci ide card It finds all hdd and dvd but don't boot just stop after recognizing. I had the same problem on F7 and F8. F4, F6, F9 , F10 works fine. So i use F9 now. Maybe in F9 temp is higher but my CPUFAN works the same with F6 and F9. I don't "hear" difference between F6 and F9.
Last edited by Jimmy007; 06-19-2007 at 10:36 PM.
Intel Core 2 Quad Q6600@3528MHz (9x 392MHz, 1.40V) (2nd Intel in my life)
Gigabyte GA-965P-DS4 rev3.3 F10
2x 1GB Patriot PDC22G6400LLK @1044MHz
Ati X1800GTO VIVO 256MB
Seagate Barracuda 7200.10 320GB SATA2
Seagate Barracuda ES 320GB SATA2
Toshiba SD-M1612
Asus 1608P2S@Pioneer DVR110
Tacens ValeoSmart 560W
Samsung 204B
Everyone I have run into a brick wall on my DS3.
I cannot overclock my E6600 above 3402MHz no matter what FSB/Multi combination I try. Anything above 3402MHz freezes at the post. Around 3500MHz I get a cycle on/off and reset.
My E6600 can run 3400MHz at 1.4V under load, so I doubt I reached the chip's max - because I have once had a Rev1.0 board that ran the E6600 at 3.6GHz before I had to RMA it, in which I ended up getting this Rev3.3 board.
I'm using PC26400 Ballistix so RAM is not holding me back, and I have a HR-05 on the northbridge so that's running well. My BIOS is F12?
Any help/suggestions?
E6600 3.51GHz| P35-DQ6 F7a | 2x2GB | 500GB | 6200LE| HX520 | AL2051W
www.HotOverclock.com Founder & Editor in Chief
---------------------
Upgrading to X58 ...
Q6600 G0 @ 3.8GHz FSB 423MHz w/Swiftech H2O 120 Compact Dual 120mm fan Last OC Details Here
abit IX38 QuadGT Rev1.0 (X38 Rev.01)
4x1GB Patriot +SL PC2-6400 Based on Aeneon AET760UD00-25D Chips! @ 1:1 1000MHz 5-4-4-8 2.0v
Sapphire Radeon HD 4850 A2 Normal Edition @ Core 820MHz Mem 2100MHz
Display 19" LG FLATRON L1960TR LCD Contrast 3000:1 Response Time 2ms Lightning Fast!! w/f-Engine Chip and DFC Technology
HDD 250GB Seagate Barracuda 7200.10 ST3250820AS
HDD 120GB Maxtor Max.10 6L120M0
PSU Zalman ZM1000-HP 1000 Watt Six 12v Rail and Dual Seperate Board
A4Tech X7 Gaming Mouse X-750BF Dual Laser Engin w/2500DPI
More about my Memory : it can do 950MHz 4-4-4-8 2.0v Stable and 1100MHz 5-7-7-12 2.2v Stable and 1200MHz 6-8-8-21 2.3v not Stable!
Bookmarks