-
Obviously question #1 is which drivers were used. Second thing is, they show both AM2 and Conroe hardware in the system specs, and a few motherboards. This is a huge flaw because if they ran the ATI tests on the AMD platform, we all know its gonna be worse than if it was run on the Intel setup.
And 3rd and most important thing is: show me stock 3dmark numbers. They don't mean much to me, but I use them as a reference when looking at results.
This review tells me nothing besides the fact that the author wasted his time and ours...
EDIT: I am referring to this: http://it-review.net/index.php?optio...=1314&Itemid=1
Last edited by ahmad; 05-09-2007 at 11:20 AM.
My watercooling experience
Water
Scythe Gentle Typhoons 120mm 1850RPM
Thermochill PA120.3 Radiator
Enzotech Sapphire Rev.A CPU Block
Laing DDC 3.2
XSPC Dual Pump Reservoir
Primochill Pro LRT Red 1/2"
Bitspower fittings + water temp sensor
Rig
E8400 | 4GB HyperX PC8500 | Corsair HX620W | ATI HD4870 512MB
I see what I see, and you see what you see. I can't make you see what I see, but I can tell you what I see is not what you see. Truth is, we see what we want to see, and what we want to see is what those around us see. And what we don't see is... well, conspiracies.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks