Forward: official GIGA 965P-S3/DS3/DS4/DQ6 beta BIOS

[HamidFULL]

Breaking NEWS!! :
today I found my old friend that works in Taiwan Gigabyte Engineering Team and we speak about Gigabyte 965 BIOS problem and he told me that he has many friends in BIOS Engineering Team, he demand me and my friend is XS (you!) that preaper list of gigabyte 965 BIOS problems and send it to his E-Mail and he will sent Problems DIRECT to Gigabyte BIOS Engineering Team

NOW Anyone that know any BIOS problem with Gigabyte 965 boards please post it here with little explain about it after finding complete list I'll send it to my friend (BIOS Engineering Team)

please help to find complete list, Tanx in advanced

[Dazog]

Breaking NEWS!! :
today I found my old friend that works in Taiwan Gigabyte Engineering Team and we speak about Gigabyte 965 BIOS problem and he told me that he has many friends in BIOS Engineering Team, he demand me and my friend is XS (you!) that preaper list of gigabyte 965 BIOS problems and send it to his E-Mail and he will sent Problems DIRECT to Gigabyte BIOS Engineering Team

NOW Anyone that know any BIOS problem with Gigabyte 965 board please post it here with little explain about it after find complete list I'll send it to my friend (BIOS Engineering Team)

please help to find complete list, Tanx in advanced

Update the Jmicron BIOS in the 965P-DS3 board please

and fix the D9 ram issue ofcourse

[Jodiuh]

Update the Jmicron BIOS in the 965P-DS3 board please

and fix the D9 ram issue ofcourse

QFT

[Lestat]

good to hear hamid.

Kenofstephens already works with the bios team directly so you already know how that goes.
but its worth a shot.

[Jodiuh]

I'd like to add that the X-Fi's got no issues with F8A as far as I can tell. It's been over 10+ reboots. The issue lies with BF2142...bah.

[Richard Dower]

Update the Intel RAID bios ROM to version 6.1.0.1002

[HamidFULL]

tanx guys until now we have 4 problem to report please complete list if you know more problem :
1.fix the D9 ram issue
2.Update the Jmicron BIOS in the 965P-DS3 board
3.when set Vcore lower than 1.2250v in DS4 Vcore jump to 1.57v after reboot
4.Update the Intel RAID bios ROM to version 6.1.0.1002

[Cranox]

When i set corevoltage at 1.600v system wont boot ( E6700 week 27 ) , 1.580v is ok
U say set it on 1.625 , well thats the problem its jumps to 1.800v now ( need 1.625 , 1.650 , but that is not selectable )

DS3 board

[Lestat]

be specific with the D9 issues.

the issue is that it wont run the ram over 950mhz stable the same ram will run easily over 1000mhz 4-4-4-12 but this mobo wont even do 950+ 4-4-4

although i agree about updating the bios for the jmicron, are there any issues ? hard drives not being seen ? misreported hard drive sizes ? if not,, if it aint broke done fix it. (they just fixed the PIO Mode issue a while ago they will just break it again!)

intel raid rom is only available on the DQ6 correct ? as the DS3 most certainly doesnt use the Intel anything its all jmicron.

[Dazog]

be specific with the D9 issues.

the issue is that it wont run the ram over 950mhz stable the same ram will run easily over 1000mhz 4-4-4-12 but this mobo wont even do 950+ 4-4-4

although i agree about updating the bios for the jmicron, are there any issues ? hard drives not being seen ? misreported hard drive sizes ? if not,, if it aint broke done fix it. (they just fixed the PIO Mode issue a while ago they will just break it again!)

intel raid rom is only available on the DQ6 correct ? as the DS3 most certainly doesnt use the Intel anything its all jmicron.

Once you install the new 1.17 jmicron Raid drivers I no longer get slowdown with my raid, it would just be nice to have the latest Rom included as well.

The Asus P5B does

[passenger59]

I think ddr2 voltage is not enough while boot for high frequence.I can set it more high in windows after boot on same timing.I can set the frequence to 1000 mhz or little more with 4 4 4 12 timing (+0,50v seems in bios)if I use easy tune .,but not from bios before boot (Corsair 5400 ul)

[ScythedBlade]

Give us a NEW BIOS already T_T!!!!!

[Lestat]

I think ddr2 voltage is not enough while boot for high frequence.I can set it more high in windows after boot on same timing.I can set the frequence to 1000 mhz or little more with 4 4 4 12 timing (+0,50v seems in bios)if I use easy tune .,but not from bios before boot (Corsair 5400 ul)

what ?

adjust the voltage in the bios for what you need. easytune is a piece of crap
if you use a multimeter and check the voltage on the motherboard you will see that the ram is getting the voltage that you told it too.
the problem is these boards have massive no booting issues at higher overclocks it has nothing to do with the ram voltage.

[HamidFULL]

1.fix the D9 memory issue
2.Update the Jmicron BIOS in the 965P-DS3 board
3.when set Vcore lower than 1.2250v in DS4 Vcore jump to 1.57v after reboot
4.Update the Intel RAID bios ROM to version 6.1.0.1002
5.when set Vcore in any option except normal C1E dosent work and EIST cant drop Vcore while idle
6.when set Vcore to 1.6v system wont boot in DS3

all above problems successfully reported to Gigabyte BIOS Engineering Team
if you find more please post it here to report

[ea6gka]

Lestat have you tried to up tha voltage to 2.1-2.2 and see if it 1000 does with CL4 ?

[TheForce81]

Now that I have watercooling I'd like to have the fan adjusting of the PWR-FAN fixed. This way I can get my PC more silent without the use of external fan controllers!! And of course the RAID firmwares!!

THANKS FOR THIS!!

Off topic:

[ea6gka]

dude i think u need a quality PSU

[TheForce81]

Well I like my PSU and it is affordable, that's why we overclock right

Which one would you advise then?

[ea6gka]

yeah right but remember that the PSU is the heart of your system , its what gives life to everything in there. So how about a TAGAN or an enermax ?

[Marvin_The_Martian]

1.fix the D9 memory issue
2.Update the Jmicron BIOS in the 965P-DS3 board
3.when set Vcore lower than 1.2250v in DS4 Vcore jump to 1.57v after reboot
4.Update the Intel RAID bios ROM to version 6.1.0.1002
5.when set Vcore in any option except normal C1E dosent work and EIST cant drop Vcore while idle
6.when set Vcore to 1.6v system wont boot in DS3

all above problems successfully reported to Gigabyte BIOS Engineering Team
if you find more please post it here to report

Sorry for being late and not more specific, 1. I ran my gkx/ghm at 999 4-4-4-15 2.1v and it seemed pretty stable but not 1:1


Didn't let it finish took to long.. damn divider issue.. fix that so I can run 1:1 with this ram

[TheForce81]

About the PSU, the quality of Huntkey is cosidered first class. So if you´re talking about peaks and reliability it is top notch. Or do you know something I don´t know?

[eXceeded]

wtf is Huntkey...?
and a problem you can report is ram voltage being displayed as failed over +0.375v on RAM

[TheForce81]

REALLY OFF TOPIC:
Huntkey is solely a power unit manufacturer (i.e. also for things that having nothing to do with PC's. I have quite some experience with those PSU's and am very pleased with their performances and sound levels.

Just because of not knowing a product doesn't make it a bad product!

[HamidFULL]

MartianInvader and TheForce81 : please write it at one line with little explain

more problems that I find out from your posts and other resource :
7.ram voltage being displayed as failed over +0.375v
8.intel QST dosen work properly

[TheForce81]

Addition to 8:

PWR_FAN isn't adjustable in any way (not through BIOS, not with speedfan, not with EZtune), just read Richard his troubles with the tech support .