Quote Originally Posted by Andrea deluxe View Post
without oc.....

Advanced CPU Features:
CPU Clock Ratio ................................ [23]
Intel(R) Turbo Boost Tech ...................... [disabled]
CPU Cores Enabled .............................. [All]
CPU Multi Threading .............................[enabled]
CPU Enhanced Halt (C1E) ........................ [disabled]
C3/C6/C7 State Support ......................... [disabled]
CPU Thermal Monitor ............................ [disabled]
CPU EIST Function .............................. [disabled]
Virtualization Technology ...................... [enabled]
Bi-Directional PROCHOT ......................... [enabled]

Uncore & QPI Features:
QPI Link Speed ..............................[auto]
Uncore Frequency ............................[3200]
Isonchronous Frequency ......................[auto]

Standard Clock Control:
Base Clock (BCLK) Control .......................... [133]
BCLK Frequency (MHz) ................................[auto]
PCI Express Frequency (MHz) ........................ [100]
C.I.A.2........................................... .. [disabled]

Advanced Clock Control:
CPU Clock Drive ..............................[auto]
PCI Express Clock Drive ................... [auto]
CPU Clock Skew ............................. [auto]
IOH Clock Skew ............................. [auto]

Advanced DRAM Features:
Performance Enhance ...................... [standard]
Extreme Memory Profile (X.M.P) ........... [disabled]
System Memory Multiplier (SPD) ........... [12]
DRAM Timing Selectable (SPD) ............. [quick]

Channel A + B + C

Channel A Timing Settings:
##Channel A Standard Timing Control##
CAS Latency Time ......................[8]
tRCD ..................................[8]
tRP ...................................[8]
tRAS ..................................[24]
CR.....................................[2]
B2B.....................................[auto]


Advanced Voltage Control:
CPU Intel Core i7 920 D0 Stepping
Load Line Calibration ................. [enabled]
CPU Vcore ..............................[1.200]
QPI/VTT Voltage 1.150v .................[1.34]
CPU PLL 1.800v .........................[auto]
PCIE 1.500v ...........................[auto]
QPI PLL 1.100v ........................[auto]
IOH Core 1.100v .......................[auto]
ICH I/O 1.500v ........................[auto]
ICH Core 1.1v .........................[auto]

DRAM
DRAM Voltage 1.500v .............. [1.68]
DRAM Termination 0.750v.......... [AUTO]
Ch-A Data VRef. 0.750v ...........[AUTO]
Ch-B Data VRef. 0.750v ...........[AUTO]
Ch-C Data VRef. 0.750v ...........[AUTO]
Ch-A Address VRef. 0.750v ........[AUTO]
Ch-B Address VRef. 0.750v ........[AUTO]
Ch-C Address VRef. 0.750v ........[AUTO]
Still not working...

Now I started from Optimized defaults again.
this sets uncore to 2667
and RAM to 1066.
If I only change uncore to 3200,
auto sets RAM to 1333.

but I`m not able to get the ram to 1600.
As far as I remember the only thing I haven`t tried
is to play around with voltages and latency settings.

I give it a couple of more tries then I leave it...
If anybody has any ideas I`d appreciate it!

Thanks for the replies!