Quote Originally Posted by kuebk View Post
The fact that Gigabyte has 50ps skews means nothing. What has already been said many times getting high fsb on quad + 600mhz on ram + pl6 is no go.

Try to lower PL, increase vDDR, vNB. Don't tell people that 50ps skews are the key while they aren't - you just can't make thing works so fast with so tight timings and so low voltage.
They are the key for stability. It doesn't matter what voltage you use when you are on the wrong skew. You will move your problem like I do with the 8 x 465MHz and DDR 1239MHz and tRD 6.

I can give as much voltage as I want it will never be 100% stable. You will reach a point that if you raise the voltage a little bit more that you will make it more unstable.

You just don't understand the importance of clock skew because you never needed it.

You see the screen shot with the 25 passes and still you don't believe that it's possible. When it isn't possible you will never reach the 25 passes, believe me. You will fail immediately or after a few passes.