Quote Originally Posted by Leeghoofd View Post
Try 8 x 400 plz with my settings... with this setting you can also run your ram at 1066Mhz if you wish... higher FSB is always better than lower FSB with higher multi for rambandwith... I would try to find out the lowest stable values for eg 3.2 with PLL and co... and then try to go higher on CPU speed... but keep them cores below 65°C plz...

Ok, that is fine. I know it will be stable at 1.4vcore so I save some time and set bios to 1.3125 which is lower then I have ever had stable before. I will let you know how that does, but at 1.4vcore my temps do not ever get above 61C so at anything under 1.4vcore I would be happy with. Just curious as to why you turn off "CPU TM Function" and "Execute Disable Bit". I thought "CPU TM function" would help prevent you from pushing the CPU to hard and 'execute disable bit" helped windows protect against viruses. BTW, I am using Vista64bit OS if that helps with anything...Right now I am running prime95 on small FFT's with your settings at 1.3125 will let you know how it does soon, thanks