Madness-Murder Jr

[theseeker]

This Aberlour is sooooo smooth that ice is all that it needs. I like it a lot better than JW Black, thanks for such a great tip.

No John! As the Scots's would say, pour yourself a wee dram and add a wee bit of water! Have a few sips and go out with the doogs!

Stop it, you guys. You're making me thirsty!


Lookin' forward to seeing the Ultra cables installed (so put the Scotch up, please )

From the woman that brought us every color of scotch labels! Twist off and have a nip!
The pics will be posted tomorrow shortly after Dim-Sum! Don't get excited, they wont look so good with the FF cabling.

[SiGfever]

No John! As the Scots's would say, pour yourself a wee dram and add a wee bit of water! Have a few sips and go out with the doogs!



From the woman that brought us every color of scotch labels! Twist off and have a nip!
The pics will be posted tomorrow shortly after Dim-Sum! Don't get excited, they wont look so good with the FF cabling.

Well just to let you know I toasted your project quite a few times tonight.

*** Forum Announcement ***

This forum does not condone the excessive use of alcohol. The above poster is over 21 (way over) and is partially in control of his faculties.

[dualbrain]

[headala]

I'm a Fat Tire man myself, but would gladly join in the party if you'll have me!

[PradaG]

nice dog pics Rocky - they look very content w/ their bones

what happened sleeving gone....oh my...ultra psu..bunched cables....oh dear...

i know what you mean about the texture - that is prob the one thing i have a problem w/ on my build - having more strands woven together makes a dramatic difference

i hope charles/nils can get some red together soon! that would make my day

good luck w/ the 3rd or is it 4th round of madness w/ your power supply saga...hopefully you can get it ironed out, get some closure & move on to that copper project

[theseeker]

Having a new problem! When the system posts I get this message, "USB Over Current Device Detected."
The strange thing is that I cannot enter setup. I have tried two different keyboards and the system recognizes ctrl-alt-del but not the delete key alone? I tried removing the CMOS battery and that did not work. This board posted just fine last week.
Any suggestions?

[Snyxxx]

Having a new problem! When the system posts I get this message, "USB Over Current Device Detected."
The strange thing is that I cannot enter setup. I have tried two different keyboards and the system recognizes ctrl-alt-del but not the delete key alone? I tried removing the CMOS battery and that did not work. This board posted just fine last week.
Any suggestions?

I am sure you have done this already, but have you unplugged all USB devices such as external hard drives, etc.? Do you have a PS-2 keyboard if the mobo can accept one?

[SiGfever]

Having a new problem! When the system posts I get this message, "USB Over Current Device Detected."
The strange thing is that I cannot enter setup. I have tried two different keyboards and the system recognizes ctrl-alt-del but not the delete key alone? I tried removing the CMOS battery and that did not work. This board posted just fine last week.
Any suggestions?

Sorry to hear this Rocky, did you by chance flash your bios? Also did you ever go by "seekermeister"? I googled it and here is the results page.

http://www.google.com/search?client=...=Google+Search

[theseeker]

I am sure you have done this already, but have you unplugged all USB devices such as external hard drives, etc.? Do you have a PS-2 keyboard if the mobo can accept one?

The only USB devices are the keyboard and the mouse. I don't have a PS2 keyboard but I am beginning to suspect an IO shield problem.

Sorry to hear this Rocky, did you by chance flash your bios? Also did you ever go by "seekermeister"? I googled it and here is the results page.

http://www.google.com/search?client=...=Google+Search

I never went by that handle and I have googling my ass off all morning!

[shazza]

Sorry to hear this ... first thing I'd check (after unplugging all USB devices) is make sure you don't have something shorting out ... any chance your motherboard screws have come loose (or perhaps too tight)?

Also, is this with the Ultra PSU? Can't imagine that being the issue, as I'd think you'd have other problems if there was a problem with the PSU voltage ... but just thinking (Danger! Danger!) ... USB takes 5 volts, so if the PSU is overshooting on the 5V line, could this lead to the USB over voltage error message? I doubt very much that this would be the case, but sometimes goofy ideas lead to the real solution.

[theseeker]

Sorry to hear this ... first thing I'd check (after unplugging all USB devices) is make sure you don't have something shorting out ... any chance your motherboard screws have come loose (or perhaps too tight)?

Also, is this with the Ultra PSU? Can't imagine that being the issue, as I'd think you'd have other problems if there was a problem with the PSU voltage ... but just thinking (Danger! Danger!) ... USB takes 5 volts, so if the PSU is overshooting on the 5V line, could this lead to the USB over voltage error message? I doubt very much that this would be the case, but sometimes goofy ideas lead to the real solution.

I think I will remove the IO shield and see what happens.

[theseeker]

Its working now. Foe some reason the MB doesn't like the Aquaero and I have never seen this happen before. When its plugged in I still get a USB over current message.
However the Feser 120.4 keeps everything very cool. I am still at stock but the CPU idles at 27 and the GPUS at 31. More to follow.

[shazza]

Glad you got it up and running.

I'm sure you've checked ... but any possibility your USB wires are crossed or not making full contact for the Aquaero (I only asked, as it was something I had to double check 14 squillion times after sleeving my Aquaero cable )

[sheaga]

Having a new problem! When the system posts I get this message, "USB Over Current Device Detected."
The strange thing is that I cannot enter setup. I have tried two different keyboards and the system recognizes ctrl-alt-del but not the delete key alone? I tried removing the CMOS battery and that did not work. This board posted just fine last week.
Any suggestions?

i had this happen to me this week. i had to pull the battery from the MB and reset it, it fixed the problem.

[theseeker]

At least it is working and running extremely cool! This Feser has completely surpassed every expectation. I am going to have a lot of headroom for OC'ing. I just ran Vantage on all factory clocks and RT is reporting 32 and Evga P is reporting 34 on both cards. I am happy as a pig in !
On with the pics!

Finally, out of focus, just like me.........



It will stay this way until I receive the new and improved blue sleeving from Nils!



The Force-Flex cables are ok, but I would rather blue & black sleeving...Nils?



I will also be swapping out my VFD Aquaero for a blue one...on order!



The artsy pics as usual..........no where near Shazza's ability!







One for Shazza....



And the money shot for shonuff! Shazza, teach me how to make wallpaper! I need this one in 25x16 for my use.....



And a big thanks to the M|M creator and God, Charles!



I am not satisfied with the wiring but I need to play some games an OC this beast. It will stay this way until I return from my travels. Hopefully, Nils will have the new sleeving ready and I can begin again. I am very happy from a performance and cooling standpoint. I am a confessed M|M-aholic, a Feser-aholic and H20-aholic.
The scotch, don't even ask, I have been drinking it for 20 years and I am still not addicted.
Cheers everyone!

[SiGfever]

At least it is working and running extremely cool! This Feser has completely surpassed every expectation. I am going to have a lot of headroom for OC'ing. I just ran Vantage on all factory clocks and RT is reporting 32 and Evga P is reporting 34 on both cards. I am happy as a pig in !
On with the pics!

Finally, out of focus, just like me.........


It will stay this way until I receive the new and improved blue sleeving from Nils!



The Force-Flex cables are ok, but I would rather blue & black sleeving...Nils?



I will also be swapping out my VFD Aquaero for a blue one...on order!



The artsy pics as usual..........no where near Shazza's ability!



One for Shazza....



And the money shot for shonuff! Shazza, teach me how to make wallpaper! I need this one in 25x16 for my use.....



And a big thanks to the M|M creator and God, Charles!



I am not satisfied with the wiring but I need to play some games an OC this beast. It will stay this way until I return from my travels. Hopefully, Nils will have the new sleeving ready and I can begin again. I am very happy from a performance and cooling standpoint. I am a confessed M|M-aholic, a Feser-aholic and H20-aholic.
The scotch, don't even ask, I have been drinking it for 20 years and I am still not addicted.
Cheers everyone!

Rocky,

Even with the lighter blue the fantastic job that you did on the sleeving is a winner over these flat cables. I understand that you are not going to change them yet but yours has MUCH more class!

Sorry to hear about the Aquaero, these things are addictive. Enjoy playing some games and overclocking that beast.
John

[theseeker]

Rocky,

Even with the lighter blue the fantastic job that you did on the sleeving is a winner over these flat cables. I understand that you are not going to change them yet but yours has MUCH more class!

Sorry to hear about the Aquaero, these things are addictive. Enjoy playing some games and overclocking that beast.
John

Many thanks John!
At least it's working and I will figure out the details by next weekend. Now it's time for a scotch........
Rock

[IanY]

Mr. theseeker,

It gets more and more beautiful each day. Congratulations on setting new standards for system builds. Very impressive indeed!

[dualbrain]

Fresh out of the lab. PCI-E sleeved with SATA-sleeve. Might be an option for you:



1. small shrink over the blank cable so that there is a seamless transistion into the connectors
2. three cables in one SATA sleeve. Put it in parallel (!) and you get the look that I achieved.
3. use SATA-heatshrink to shrink it



Edit: OMG ... I see that you have "different faceplate"

[theseeker]

Mr. theseeker,

It gets more and more beautiful each day. Congratulations on setting new standards for system builds. Very impressive indeed!

I take a bow! Many thanks for the compliment!!! I truly appreciate your kind words.

Fresh out of the lab. PCI-E sleeved with SATA-sleeve. Might be an option for you:



1. small shrink over the blank cable so that there is a seamless transistion into the connectors
2. three cables in one SATA sleeve. Put it in parallel (!) and you get the look that I achieved.
3. use SATA-heatshrink to shrink it

You are in big trouble Nils! It's beautiful, I need it in blau!!!

[dualbrain]

You get it in Blau





Blau - Blau - Blau
Btw. these pictures are color ...

[theseeker]

Nils, Send it tomorrow! EINMALIG!!!

[dualbrain]

Einmalig?
The stuff will be einmalig, but you will get it mehrmals I guess

Kirk will send it to you once the bluebird has landed - directly from the USA.

[theseeker]

Einmalig?
The stuff will be einmalig, but you will get it mehrmals I guess

Kirk will send it to you once the bluebird has landed - directly from the USA.

Ausgutsichtniecht! i probably screwed that one up........

[j.almonte]

me want some !!!!!!!!!!!!!!!!!!!