D-tek nozzles

[RX7boricua]

Hell yes, Petra's does rule! I ordered some replacement EK FC8800 thermal pads for my Ultras, some more MX-2, and some more Arctic Cleaner the other day from them, and the D-Tek nozzles were out of stock. I asked them to throw in a set of nozzles and add them to my order should any new stock magically arrive in the 5.38 minutes it took them to process my order. Alex wrote me a note stating that it took him a little bit longer than 5.38 minutes to get my stuff shipped out, but that he was able to find me a stray set of nozzles, which he threw in free of charge "for being so slow". This is why you should all buy from Petra's Tech. Who cares if someone else has the same thing for two dollars less. The level of service you receive from Petra's is unmatched. If all other companies were like them, the world would be a much better place. Petra's, if I ever make it out to San Jose one day, dinner's on me!

[Jedda]

Yeah, it's easy enough to be like that when a business kicks off, but to maintain that kind of service year out year in takes a special kind of folk. Alex and Quoc are all right in my book.

[iadstudio]

Seriously, the best part about Patra's is you can call them if you have to and they will give you a straight answer on stock, availability, etc.

Very rare place indeed!!!

[I)ickie]

Seriously, the best part about Patra's is you can call them if you have to and they will give you a straight answer on stock, availability, etc.

Very rare place indeed!!!

Couldn't agree more.
Just ordered some stuff from Aus and couldn't be happier.
For me its a win win situation. I get great customer service from the guys at Petra's and its cheaper than the crap that we get dealt with in Australia.
Cheaper and better
Thanks guys

[Borgod]

And usually arrives to us in Aus faster than from Aus retailers.

[step]

And usually arrives to us in Aus faster than from Aus retailers.

That is the kind of service we get over here, overpriced and lazy. Though I have to admit, the service from GAM was very decent, pccasegear was terrible.

[Jedda]

Yeah, GAM stands out for his support. Have seen him helping out new case modders with bits n pieces too. When you're unknown is the time that really helps.

[disruptfam]

Petra's is awesome ordered gear, received 3 days later nice!!!

Gam is a top bloke never had trouble with him... good service fast postage time's

Best service I've come across by far in Aus is with wade @ itsdirect.com.au
I get my gear the day after i order it...sometimes even the same day!!!!Even if he doesn't stock something he's happy to bring it for you no worries.

It's like having my own personal computer store.. haha

[warbux]

I am using the "quad" nozzle on my quad core E6600 G0 running at 3.8 ghz and the temps under load went down about 2.5 C which is pretty nice imo. I cant speak about flow restriction. I have no way to measure flow that will reproduce the same results every time.

[rbsmontemor]

I am using the "quad" nozzle on my quad core E6600 G0 running at 3.8 ghz and the temps under load went down about 2.5 C which is pretty nice imo. I cant speak about flow restriction. I have no way to measure flow that will reproduce the same results every time.

That's good to know

Thanks

[Jedda]

I am using the "quad" nozzle on my quad core E6600 G0 running at 3.8 ghz and the temps under load went down about 2.5 C which is pretty nice imo. I cant speak about flow restriction. I have no way to measure flow that will reproduce the same results every time.

Isn't that Q6600?

[denden]

I just ordered from Petras. looking forward to receive it soon and test how much it could bring down my q6600@3.75G, now is 60 at full load

[Jedda]

I just ordered from Petras. looking forward to receive it soon and test how much it could bring down my q6600@3.75G, now is 60 at full load

Some say no diff but others like me see a 2-3° drop. I'm wondering if either B3 or G0 stepping responds differently.

[winston856]

Some say no diff but others like me see a 2-3° drop. I'm wondering if either B3 or G0 stepping responds differently.

Could also be a difference in the TIM. Cure vs. non-curing (AS5 vs. MX-2).

[warbux]

Isn't that Q6600?

lol yea fat fingered it sorry.

[Talonman]

It may turn out we don't see much of a temp difference at idle, but more of a drop under load? I do think the rubber washer, diverting more flow toward the block would have to help.

Ya have to remember the price too.

Not a huge investment.

If you happen to making a new loop right now, I would say go for it for sure.

If I had an existing loop and didn't want to break into it, I wouldn't worry about it too much..

If you want every last C, just the fact we had 1 or 2 good reports posted, would probably get me to roll the dice.

That is how I see it so far, for whatever that's worth...

[Xilikon]

Exactly, it's so inexpensive it's worth a try... As I'm building a new loop, there is no reason to skip it

[peebee]

Wohooo!

Just got my nozzles from Overclock-UK! Just simple mail and only few days from UK to Germany!

Well, let us see, what it brings to my Q6600.
Maybe nothing, maybe some drop. (drop in flow for sure haha)

[disruptfam]

lol @ sig

[peebee]

lol @ sig

??
My sig?
What about my sig?

[Nate P.]

??
My sig?
What about my sig?

It's hilarious!

[peebee]

It is a wise sentence at all
Originally from Bruce Lee!

I like it very much! Especially the words, that it can flow or crash.
My tubing wasn´t secure for 2 times (while testing the loop) and the water splashed through my case. I was very busy cleaning it all. If this happens to my computer while running, it crashes. If the tubes are secured, it flows.(~450l/h)

[Shadowtester]

I thought you were going to say it was from a fortune cookie

[louie101086]

my nozzles are pretty good and so is my new q6600 has a low vid and overclocks like a charm i got 3.2ghz @ 1.35 havent really banged out because i just got my p35-dq6 but voltages are very stable vdroop isnt that bad and temps are all around 33c except 4th core its around 28c

[disruptfam]

bruce lee is my hero!!!