Quote Originally Posted by fatguy1992 View Post
Could someone please tell me how to set up DRAM Termination, MCH/DRAM Reference and Channel A & B references?

Thanks
I don't have a how to answer but I can tell you in my efforts to get my Q9650 prime stable at 4450mhz (which I am still failing at btw) I played with most of the reference & voltage settings & found a strange thing.

The board displays the std/normal value e.g. MCH Reference = 0.760, ET6 also displays 0.760 but if with my quad you try booting with this value set to (I think) 0.766 the board wont boot. I found I needed to manually set 0.924 to get my board running prime. ET still displays 0.760 even though I manually set 0.924 in BIOS.

Which brings me to my point....... I would find the value you need to set to boot & simply test/fine tune up & down from there for each value.

I could find no benefit tweaking any of the values you are interested in "DRAM Termination, MCH/DRAM Reference and Channel A & B references" with my rig & 4 x 1GB sticks running up to 1250mhz.

CN