BlueAqua's SuperProject: MurderMod TJ-07, MM UFO, V2000

[BlueAqua]

Damn I just watched the video of your build: Absolutely stunning your decent lightshow! Big congratulations from me for your wonderful work.

Thanks dualbrain! I should have some finished photographs soon and maybe another little video just for fun.

How did you mount the rad to stand on its side? Is it secure?

The Hammond boxes are secured to the frame by 4 screws. The rads are secured to those with a strong double sided tape. It's not going anywhere, that's for sure.

[Eddie3dfx]

That murder mod box is so sick. Excellent job on the wire guides and sleeving.
Is the inside powder-coated?

[BlueAqua]

That murder mod box is so sick. Excellent job on the wire guides and sleeving.
Is the inside powder-coated?

Thanks Eddie. Yes the internals and backplate are powder coated solar black. The powder coat is very even and really has a nice finish.

[bianco]

hi BA,

i know these pics are just for dingdong... :P
but may i know the size of those clamps/clips?

thanks!

[BlueAqua]

hi BA,

i know these pics are just for dingdong... :P
but may i know the size of those clamps/clips?

thanks!

I bought those from McMaster and here is the information for that.

8876T36
(Same as 8876T13)
Nylon Loop Clamp for 1/4" Outside Diameter, Black
In stock at $5.12 per Pack

I think if I were to do it again I might go just a bit larger, so maybe 3/8". 1/4" is only large enough for 2 wires, so I had to get creative.

[bianco]

I bought those from McMaster and here is the information for that.

8876T36
(Same as 8876T13)
Nylon Loop Clamp for 1/4" Outside Diameter, Black
In stock at $5.12 per Pack

I think if I were to do it again I might go just a bit larger, so maybe 3/8". 1/4" is only large enough for 2 wires, so I had to get creative.

thanks for the info BA. your solution was very creative and neat actually.
i'll try to find something similar locally, shipping from mcmaster might be more expensive than the clamps. haha.

btw, if you went with bigger ring, the case might not close properly?

[BlueAqua]

thanks for the info BA. your solution was very creative and neat actually.
i'll try to find something similar locally, shipping from mcmaster might be more expensive than the clamps. haha.

btw, if you went with bigger ring, the case might not close properly?

Thank you!
There is enough room back there for larger clamps, maybe even enough for 1/2" clamps. You should be able to find something local, if not let me know and I'll mail you some.

[bianco]

Thank you!
There is enough room back there for larger clamps, maybe even enough for 1/2" clamps. You should be able to find something local, if not let me know and I'll mail you some.

haha. aw... that's too generous of you BA.
i think i'll search the entire island first before i trouble you.
appreciate the offer

[ShoNuff]

Sidewinder FINALLY has these beautiful blocks in stock.

[BlueAqua]

Thanks ShoNuff. I just ordered my LGA 1366 Adapter plate and another radiator for the i7 upgrade.

[hiiyah777]

Sidewinder FINALLY has these beautiful blocks in stock.

Ooh! Do want!

[dingdong555]

Thanks ShoNuff. I just ordered my LGA 1366 Adapter plate and another radiator for the i7 upgrade.

[ShoNuff]

Got my PsychoPak sleeving kit from murderMod. They send you a TON of stuff. I had no idea so much came with the kit. I will be busy for a while.

[syc]

Very-very NICE job

[headala]

Got my PsychoPak sleeving kit from murderMod. They send you a TON of stuff. I had no idea so much came with the kit. I will be busy for a while.
/snip/

What does all that cost?

[PaRn ssR]

please update more pictures

[PsYcHoNo0b727]

Wow, the more i look at the MurderMod TJ07 the more i want the case lol.

[INFRNL]

Sidewinder FINALLY has these beautiful blocks in stock.

Is the XT DI a better block than this one? Also do they make adapter plates to fit 1366? Lastly; how are these compared to the apogee GTZ?

I was going to get the GTZ till I saw this thread with the AC parts. Those look top notch.

ALSO to BA; excellent job on all your builds! Just want to mention one idea that you may or maynot like; Thinking that you should make you liquid for the TJ-07 white or whiteish; cause when you look at the res, it kind of off with the rest of your color scheme. Not even sure if anyone makes a white fluid, but just a thought. Otherwise an excellent build.

[ShoNuff]

What does all that cost?

Here is a link regarding the details of the murderMod sleeving kits. If you purchase everything separately I am sure it would costs you more. I was expecting a little box and I got a huge box with all the stuff pictured above. I got enough to last me a life time.

Is the XT DI a better block than this one? Also do they make adapter plates to fit 1366? Lastly; how are these compared to the apogee GTZ?

I was going to get the GTZ till I saw this thread with the AC parts. Those look top notch.

cut...

If you go to the "English" section of the AquaComputer forum their is a link to a review using the Cuplex HD and GTZ if IIRC. The margin of difference between all the blocks tested was smaller than expected.

You can get the 1366 adapter fittings from Sidewinder as well.

[BlueAqua]

It's been a long time since an update. I've changed a few things and now have a lovely i7 build in the MurderMod. I'll post some more pictures shortly, but here is one until I get them all ready.

[theseeker]

Kirk,
Beautiful as always!
Rocky

[SiGfever]

Great looking rig.

[shazza]

Awesome ... as a matter of fact, I just finished re-reading your TJ07 worklog about an hour ago. Good Stuff

[BlueAqua]

Wow, thanks guys. Nice to know somebody cares.

Here are some more pictures.















It's quite challenging to get good pictures of the different types of anodizing on the front. The light reflects differently on every one of them. Charles is a much better photographer than I but I just had to post some more pictures of my pride and joy.

I'll work on taking some more shots to see if I can improve.

[SiGfever]

Wow, thanks guys. Nice to know somebody cares.

Here are some more pictures.















It's quite challenging to get good pictures of the different types of anodizing on the front. The light reflects differently on every one of them. Charles is a much better photographer than I but I just had to post some more pictures of my pride and joy.

I'll work on taking some more shots to see if I can improve.

Please keep the pics coming, that is one clean beautiful build.