BlueAqua's SuperProject: MurderMod TJ-07, MM UFO, V2000

[Agrostar]

Looks like a pretty nice rig. Fan of aquacomputer?

[dingdong555]

AWESOME!

How about lower chamber pictures?

[BlueAqua]

Thanks guys! Yes, I am a lover of Aqua Computer. I really like so many products from a lot of different companies but Aqua Computer has never let me down. But, as you can probably see, I am well diversified in water cooling gear.

dingdong555 I'll take some more pictures of the lower chamber for you later tonight.

[BlueAqua]

Here are two more pictures, just for Dingdong555.

[BlueAqua]

I have something special just for you guys. Here is a video in action of it running. It's the only way to could show just how good the lighting looks in it.

It's an 85.5Mb file, but it's high quality and a minute and a half long. Check it out and let me know how you like it.


http://files.filefront.com/MurderMod.../fileinfo.html

[emoners]

BA, what clips are those you're using on the back?

[tamtam1]

Very nice worklog with a beautiful looking case. Also a wonderful cable-management.
Regarding the vid: I can´t hear your system, only your wheeze

[BlueAqua]

BA, what clips are those you're using on the back?

I got them from McMaster Carr. They are just some nylon cable clips.

Very nice worklog with a beautiful looking case. Also a wonderful cable-management.
Regarding the vid: I can´t hear your system, only your wheeze

ya, my wheeze.... lol

It's pretty quiet eh? It's all about the electronic fan controller, the Aquaero.

[dingdong555]

Thanks BA.

Very nice indeed! My lower chamber (of my case) is no where as near clean as that, although, I have alot of lights/fans etc..

[ShoNuff]

That is clean...very clean! I'm still trying to figure out how you routed the 6 and 8 pin PCIe cables? I guess that just speaks to how well you did it.

The lighting is also cool on the vid. I was partial to blue but I may have to investigate the white lights.

[BlueAqua]

Thanks BA.

Very nice indeed! My lower chamber (of my case) is no where as near clean as that, although, I have alot of lights/fans etc..

You are welcome, and thanks. The wire management definitely took the longest in this project.

That is clean...very clean! I'm still trying to figure out how you routed the 6 and 8 pin PCIe cables? I guess that just speaks to how well you did it.

The lighting is also cool on the vid. I was partial to blue but I may have to investigate the white lights.

Thanks ShoNuff. The pci-e cables are sandwiched between the motherboard and motherboard tray. I am quite fond of the white lights, but it just goes along with the whole theme I guess. I think if you used white lights with any color it would still light it up nicely. The way it lights up the acrylic on the video card is nice too.

[sniperbob]

just watched the clip, and wow that is a quiet system you have there BA. and by the way BA should stand for BadAss because that's what this build truly is. Masterfully done man! enjoy the fruits of your labors now!

[JoOs7eR]

one of the best TJ07 i've seen so far... good job bro...

respect the effort you've put in

[tamtam1]

Why you don´t use a coloured foil for the Aquaero display? It would race the inner perfection.....and perhaps you could teach your case to breath like you *murdermod-sound*, but ask Charles and Nils first

[inCore]

I'm in love, thank you for giving me the opportunity to watch something like this in motion. I can now die happy.

Ok fine, I still have some other things I'd like to do before I die but hey.

[emoners]

know what BA, still can't figure out where the cables go where hahaha truly AWESOME management!

[BlueAqua]

just watched the clip, and wow that is a quiet system you have there BA. and by the way BA should stand for BadAss because that's what this build truly is. Masterfully done man! enjoy the fruits of your labors now!

It's really quiet when it's just idling or surfing XS, but as soon as you load up a game or a higher power application the water temperature rises a bit and then the fans kick up and keep it cool. It's a bit louder but not really too bad. I think it's a great balance. Thanks sniperbob for the great compliment.

one of the best TJ07 i've seen so far... good job bro...

respect the effort you've put in

Wow thanks so much.

Why you don´t use a coloured foil for the Aquaero display? It would race the inner perfection.....and perhaps you could teach your case to breath like you *murdermod-sound*, but ask Charles and Nils first

I never thought about a foil over the display, but I actually like how it looks now. It's better in person, and after it boots up the display back lighting turns off.

I'm in love, thank you for giving me the opportunity to watch something like this in motion. I can now die happy.

Ok fine, I still have some other things I'd like to do before I die but hey.

Thanks! I like the video, anything in action is just a bit better. Maybe I can make another one, a bit more polished.

know what BA, still can't figure out where the cables go where hahaha truly AWESOME management!

It's tricky. I had to extend and create a bunch off custom cables to finish it off right. I put a lot of time into the cable management, the most difficult aspect of building this I think. All said and done I'm really happy with it. Every cable is individually sleeved, even the ones you cannot see. The only spot in the case where I could actually "hide" cables is behind the face plate, but even that remained fairly clean.

Let me know if you want any specific details on how I accomplished this.

[theseeker]

Absolutely stunning!

[Buckeye]

Very Very Sweet Blue !!

I was thinking the other day that I haven't heard from you for awhile, I thought that you might be out driving crazy cars again

[Cutless009]

Will you teach me to be awesome like you?

[FtB]

It's tricky. I had to extend and create a bunch off custom cables to finish it off right. I put a lot of time into the cable management, the most difficult aspect of building this I think. All said and done I'm really happy with it. Every cable is individually sleeved, even the ones you cannot see. The only spot in the case where I could actually "hide" cables is behind the face plate, but even that remained fairly clean.

Let me know if you want any specific details on how I accomplished this.

Me, me!! I want specifics (with photos would be nice!!)

[turtletrax]

Hey BA\Skinnee\Charles_H\Dangals !

Sorry I am still without internet at home, but I find it hard to even bother with dial-up, and will the little spare time I have I cant stand around and wait for a page to load for 5 minutes LOL.

I got my Murdermod faceplate and my sleeving and think I will to a teardown and rebuild starting this weekend. I got some alu for improved res bracket meterial and now have the fittings I need. I was going to add the chipset block but will have to wait to add it at a later time. Way to sick of waiting for stuff and getting packages at teh acreage drives me insane (long story).

Finally had time to go through your whole buildlog again BA and I have to say it is fantastic, front to back. You went to town and man, did it pay off. If you get a chance shoot me your home phone if you dont mind. I want to ask some questions so I will shoot you a call and we can BS alittle and help a fella out.

On other news, the acreage is getting there and I have the Mercedes and Smart cars on the road now. Sure is nice to ride in style and comfort in the E320, and the Smart car is halariuous. All the rednecks at work razz me, but I dont care. 20 bux for 1000kms of driving is well worth the razzing, and it kinda feels good to not burn gas like it is going out of style.

Well, just wanted to pop in and let you know I am still alive.

Talk to you later!

[BlueAqua]

Absolutely stunning!

Thank you!

Very Very Sweet Blue !!

I was thinking the other day that I haven't heard from you for awhile, I thought that you might be out driving crazy cars again

I just drive my wife crazy now, not quite as fun, but it's still entertaining. I'm glad you like the build. Maybe your TJ07's could use a bit of sprucing up?

Will you teach me to be awesome like you?

Me, me!! I want specifics (with photos would be nice!!)

Just sleeve everything! I probably used 150 feet of sleeving total, but it could be done with quite a bit less, maybe I just went overboard. Use minimal cable runs, combine fan cables if you can, splice cables in hidden areas and then sleeve some more.

Hey BA\Skinnee\Charles_H\Dangals !

Sorry I am still without internet at home, but I find it hard to even bother with dial-up, and will the little spare time I have I cant stand around and wait for a page to load for 5 minutes LOL.

I got my Murdermod faceplate and my sleeving and think I will to a teardown and rebuild starting this weekend. I got some alu for improved res bracket meterial and now have the fittings I need. I was going to add the chipset block but will have to wait to add it at a later time. Way to sick of waiting for stuff and getting packages at teh acreage drives me insane (long story).

Finally had time to go through your whole buildlog again BA and I have to say it is fantastic, front to back. You went to town and man, did it pay off. If you get a chance shoot me your home phone if you dont mind. I want to ask some questions so I will shoot you a call and we can BS alittle and help a fella out.

On other news, the acreage is getting there and I have the Mercedes and Smart cars on the road now. Sure is nice to ride in style and comfort in the E320, and the Smart car is halariuous. All the rednecks at work razz me, but I dont care. 20 bux for 1000kms of driving is well worth the razzing, and it kinda feels good to not burn gas like it is going out of style.

Well, just wanted to pop in and let you know I am still alive.

Talk to you later!

I was wondering what happened to you. I was hoping you would be getting at least dial up so we can Skype it up. I think you need to drive your Smart car down to my house, since it's so cheap. I'll let you use my internets.

It's funny how we started talking about the TJ07 build months ago and never would I have thought it would have ended up like this. My plans changed a few times and I'm damn pleased with the results. Let me know if there are any little parts or whatever you might need for your build. You have PM.

[dualbrain]

Damn I just watched the video of your build: Absolutely stunning your decent lightshow! Big congratulations from me for your wonderful work.

[jigster]

How did you mount the rad to stand on its side? Is it secure?