I were have V1000 for witing a small cool modding long time..So i started it..Here is the start.. İ hope you like it...
Let The Mod Begin
İ am gonna add more photos![]()
I were have V1000 for witing a small cool modding long time..So i started it..Here is the start.. İ hope you like it...
Let The Mod Begin
İ am gonna add more photos![]()
Last edited by master_gokhan; 03-31-2007 at 04:08 AM.
can you tell us what you have planed to do, or is it a secret?
allso it whould be nice if you chould tell us what kind of hardware are you gonna use in this mod.?
water or air cooling?
Evga X58 sli under cascade
http://www.xtremesystems.org/forums/...d.php?t=219788
Evga X58 Sli ultimate overclocking/ overview/ discussion thread
http://www.xtremesystems.org/forums/...d.php?t=221082
proud owner of E8600 Q822A435
I always love v1000/v2000 mods![]()
![]()
Just one small question: isn't that rear fan blowing the wrong way? As it is now, it's blowing air into the case.. I thought it was an exhaust fan there.
PROUD OWNER OF A S754 SYSTEM AMD Athlon64 3700+
DEAD DFI Lanparty UT nForce3 250GB DEAD MSI k8n Neo platinum
1024MB GeIL Ultra-X PC3200
Club3d 7800GS 256MB
Tagan EasyCon 530Watt![]()
guys ı am gonna change all the fans in the case and i am planning for the fan controller (special) and conna finish cutting tomorrow. v1000 is really cool case. gonna do air cooling for CPU with big typhoon with different fan and water cooling for VGA .. wait and see![]()
Last edited by master_gokhan; 02-21-2007 at 04:30 PM.
Originally Posted by sTaBZz
no, they designed it to work like this:http://www.performance-pcs.com/catal...ducts_id=20412
but you can do it how you want. i use it as an exhaust but i am in a v2000b+2 with phase change cooling.
QX 9650 5ghz with 1.55v 4.8ghz with 1.5v 24/7 in a VAPOLI V-2000B+ Single stage phase cooling.![]()
DFI LP LT X-38 T2R
2X HD4850's water cooled , volt modded
Thermaltake 1KW Psu
4x Seagate 250GB in RAID 0
8GB crucial ballistix ram
Originally Posted by jimmyz
only the plus was that way i do believe. My old PC-V1000 had the fan setup as an exhause fan originally.
Originally Posted by lowfat
so true .. i wasn't even thinking about the lack of upper fan on the regular.
btw. if you look around that site the +2 is $10 cheaper than the regular? and that isn't the first time or site i have noticed it. and for the record i have always had good luck with that site.
QX 9650 5ghz with 1.55v 4.8ghz with 1.5v 24/7 in a VAPOLI V-2000B+ Single stage phase cooling.![]()
DFI LP LT X-38 T2R
2X HD4850's water cooled , volt modded
Thermaltake 1KW Psu
4x Seagate 250GB in RAID 0
8GB crucial ballistix ram
My PV-V1000 is setup to have the rear fan act as exhaust, plain jane version. I love this case, simple and aethetically pleasing. Makes for a good canvas for skilled modding too.
So I've heard. The guy i sold mine too is quite excited to start modding his.Originally Posted by KingThot
this is not plus II model one
This one is
İ cutted the side panel.. Now i am cutting the top side of the case...
Ok guys cutted the top panel finally i add more photos...
i ll add more photos..
Gokhan really nıce work really nıce case&mod![]()
Intel Core i7 930@ 4.0Ghz | Gigabyte EX58-UD4P | 3x2Gb OCZ 1600mhz | Palit GTX280 | 1TB Seagate | Samsung P2350 23'' | Silverstone Decathlon DA750W | Lian-Li PC777B | Logitech Z-5500 | Creative X-Fi| Iphone 4
Hardwarena Overclock Team
Gökhan what will u mount there? radiator? fans?
bu arada ilk mesajım sana oldu![]()
i am thinking Two Blue fans for top side.. Gonna stick them in 2 days...
İlk mesajın için tebrikler..![]()
May i know what did you used to fix the piece of acrylic on to the top panel ? Thanks
E6300|DS3|X19XT 512MB|KVR|H2O
i dont know may be same slicon i used on side panel or screws tomorrow fans coming for top panel... gonna do it.
did some nice work
![]()
goona finish soon
Looking good I like what you did with the top.
=- Main RIG -=Quake 4 flies - Problem Solved
![]()
-= Intel QX6700 2660 MHz OC 3.2 GHz =-
-= Asus Striker Extreme nVidia nForce 680i SLI =-
-= PDP Patriot Dual XBLK 2x 1GB DDR2 1 GHz CL4 =-
-= EVGA GeForce 8800 GTX 768MB KO ACS3 =-
-= Creative Sound Blaster X-Fi Fatal1ty =-
-= WD Raptor X 150 GB 16MB SATA =-
-= 2xSeagate 320 GB Barracuda 16MB SATAII =-
-= CoolerMaster Stacker 830 Black =-
-= Topower TOP-1000P10 U12 EZ =-
-= Logitech G15 =-
-= Razer Copperhead Laser 2000 DPI Blue =-
-= Logitech Z-5500 THX =-
-= Dell 2407 WFP UltraSharp =-
-= Windows XP Pro SP2 =-
Sorry for my bad English. I'll try to improve.
its gonna look really cool when the fans ligts up![]()
Cables Rolled;
![]()
looks good m8
don't you guys think it allways looks sooo sweet when you've had your cables sleeved and none of the hardware is in![]()
The multiple screen Wallpaper topic!: http://www.xtremesystems.org/forums/...d.php?t=190723
The System wallpaper topic!: http://www.xtremesystems.org/forums/...d.php?t=180050
thats right..i am goona put some hardware for the ligts up... İ am wondering how its look
![]()
Somebody turn the lights on.![]()
![]()
I see you have 2 revoltec fans. Could you tell something more about them like for example; are they silent or a bit loud?
=- Main RIG -=Quake 4 flies - Problem Solved
![]()
-= Intel QX6700 2660 MHz OC 3.2 GHz =-
-= Asus Striker Extreme nVidia nForce 680i SLI =-
-= PDP Patriot Dual XBLK 2x 1GB DDR2 1 GHz CL4 =-
-= EVGA GeForce 8800 GTX 768MB KO ACS3 =-
-= Creative Sound Blaster X-Fi Fatal1ty =-
-= WD Raptor X 150 GB 16MB SATA =-
-= 2xSeagate 320 GB Barracuda 16MB SATAII =-
-= CoolerMaster Stacker 830 Black =-
-= Topower TOP-1000P10 U12 EZ =-
-= Logitech G15 =-
-= Razer Copperhead Laser 2000 DPI Blue =-
-= Logitech Z-5500 THX =-
-= Dell 2407 WFP UltraSharp =-
-= Windows XP Pro SP2 =-
Sorry for my bad English. I'll try to improve.
blue fans are queit and nice light they give.![]()
Bookmarks