MMM
Page 1 of 2 12 LastLast
Results 1 to 25 of 47

Thread: Here's A Special WR (P4 650).........

  1. 06-12-2006, 01:55 AM #1
    s7e9h3n
    s7e9h3n is offline
    Phenom™
    Join Date
    Sep 2002
    Posts
    5,163

    Here's A Special WR (P4 650).........

    for all you doubters of Cryo-tek who said it wasn't possible to hold a high load @ low temps on an autocascade . If you're wondering what I'm talking about, check here - http://www.xtremesystems.org/forums/...ad.php?t=97265
    BTW - I have absolutely NO IDEA what I'm doing on this Asus P5wd2E-Premium so please excuse the poor results of the benches.....at least until I figure out what all the settings on this mobo do.....

    The CPU:



    Initial Boot:



    The Screenie - I hope it counts since I hadn't yet updated my CPUZ so my validation file isn't allowed



    This is what matters though...an 8m @ a HIGHER SPEED than the previous WR. Vcore was actually drooping on the shot (I didn't bother adjusting my droop mod ). Running Vcore was around 1.70v. ~-100C Evap temps LOADED....not bad for a single compressor and a heater on the back of the mobo, eh? That makes this unit 2 for 2 -> 2 CPU's, 2 WR's Now to figure out how to get 1.9Vcore...



    Special thx to FCG for loaning me this setup to test my unit (and of course to Cryo-tek for modding it)
    FX56....
    Reply With Quote Reply With Quote
  2. 06-12-2006, 01:59 AM #2
    ReD.SkY
    ReD.SkY is offline
    XS_THE_MACHINE
    Join Date
    Jan 2006
    Location
    USA/California/Sacramento
    Posts
    1,619
    Send a message via ICQ to ReD.SkY Send a message via AIM to ReD.SkY Send a message via MSN to ReD.SkY Send a message via Yahoo to ReD.SkY
    Nice!
    Asus P5B-Deluxe 0614
    Conroe E6400 @ 2.56ghz
    Team Xtreem DDR2 2x1GB @ 900
    ATI X1900XTX // MC14 Ramsinks -DEAD- Using spare 7900gt now
    Hitachi 80gb | Hitachi 80gb | Seagate 320gb
    Mountainmods U2-UFO Original Black \\ BenQ DVD-RAM
    Corsair Hx620
    Swiftech Storm r2 \\ Swiftech MCW60 \\ Swiftech MCW30 \\ Thermochill PA120.3 \\ Swiftech MCRES Micro \\ DDC+ Plexi Top
    Heatware | Guide To Current WaterCooling Components | Guide To WaterCooling and Leak Testing
    Reply With Quote Reply With Quote
  3. 06-12-2006, 02:00 AM #3
    K404
    K404 is offline
    Wanna look under my kilt?
    Join Date
    Jun 2005
    Location
    Glasgow-ish U.K.
    Posts
    4,396
    VERY nice! I`m also loving the "smiley" right at the start of the post!!

    Kenny
    Quote Originally Posted by T_M View Post
    Not sure i totally follow anything you said, but regardless of that you helped me come up with a very good idea....
    Quote Originally Posted by soundood View Post
    you sigged that?

    why?
    ______

    Sometimes, it's not your time. Sometimes, you have to make it your time. Sometimes, it can ONLY be your time.
    Reply With Quote Reply With Quote
  4. 06-12-2006, 02:00 AM #4
    SIOUX
    SIOUX is offline
    Xtreme X.I.P.
    Join Date
    May 2004
    Location
    Hammel/Denmark
    Posts
    2,060
    Send a message via ICQ to SIOUX
    Nice work Steven
    The whole world's hip and thats not cool !

    Rip Van Hippy

    Doesn't expecting the unexpected make the unexpected the expected ?

    Light travels faster than sound. This is why some people appear bright until you hear them speak


    -------------------------
    Reply With Quote Reply With Quote
  5. 06-12-2006, 02:24 AM #5
    G H Z
    G H Z is offline
    ¿
    Join Date
    Jul 2003
    Posts
    4,772
    What settings? This is cake compared to a DFI setup your so used to. Btw, your supposed to show us a pic with the temp probe shown while the 8M is running

    Sorry I couldn't resist, we'd all love to have a cooling unit like that. Congrats to Cryo on a real feat, and a nice number on that 650
    Reply With Quote Reply With Quote
  6. 06-12-2006, 02:37 AM #6
    s7e9h3n
    s7e9h3n is offline
    Phenom™
    Join Date
    Sep 2002
    Posts
    5,163
    Quote Originally Posted by G H Z
    What settings? This is cake compared to a DFI setup your so used to. Btw, your supposed to show us a pic with the temp probe shown while the 8M is running

    Sorry I couldn't resist, we'd all love to have a cooling unit like that. Congrats to Cryo on a real feat, and a nice number on that 650
    Hehehe...if only you've ever seen the bios of one of these Asus boards I haven't heard of over 1/2 of these settings. My probe is sitting atop my autocascade and I can't get a pic of it in the same shot as the monitor...just gotta take my word for it Probe on the die of the cpu shows a deltaT of 7C from idle to load. Try that with your DI container and you'll see just how hard that is to achieve

    Thanks for the suppory guys...I'm gonna try 1.8V+ on another board this week
    FX56....
    Reply With Quote Reply With Quote
  7. 06-12-2006, 03:05 AM #7
    jumanji969
    jumanji969 is offline
    Xtreme Member
    Join Date
    Jun 2004
    Location
    Saginaw, Michigan
    Posts
    450
    Interesting to see you trying something new, figured you would have to with that autocascade. Nice work .
    Ode to Nice Guys

    3DMark01 = 21,375 3DMark05 = 3024
    Reply With Quote Reply With Quote
  8. 06-12-2006, 03:10 AM #8
    Trouffman
    Trouffman is offline
    Xtreme Addict
    Join Date
    Aug 2005
    Location
    Somewhere on earth between Taipei, Paris and Montreal
    Posts
    1,194
    Send a message via MSN to Trouffman Send a message via Skype™ to Trouffman
    nice clock and nice unit
    Reply With Quote Reply With Quote
  9. 06-12-2006, 03:20 AM #9
    eva2000
    eva2000 is offline
    Memory Addict
    Join Date
    Aug 2002
    Location
    Brisbane, Australia
    Posts
    11,651
    Nice.. not sure what to think Kev on 930 and now you on 650 lol
    ---
    Reply With Quote Reply With Quote
  10. 06-12-2006, 03:33 AM #10
    Onepagebook
    Onepagebook is offline
    Banned
    Join Date
    Jan 2004
    Location
    Land of Buckeye
    Posts
    2,881
    I am not surprised at all, I will try to get WR for 930
    bring it on for 1.9v vcore,
    Nice insulation work bro
    Reply With Quote Reply With Quote
  11. 06-12-2006, 04:49 AM #11
    Piotke
    Piotke is offline
    Xtreme Member
    Join Date
    Nov 2002
    Location
    Antwerp - Belgium
    Posts
    131
    Can't wait to see higher vcore results. Nice job !
    www.madshrimps.be
    Reply With Quote Reply With Quote
  12. 06-12-2006, 05:01 AM #12
    Escobar999
    Escobar999 is offline
    Registered User
    Join Date
    Jan 2006
    Location
    st-jerome.qc.ca
    Posts
    55
    Send a message via MSN to Escobar999
    nice result indeed!

    can u take the insulation off after youre done with the mobo?
    Representing The REAL 0nes


    Excuse my english im still learning

    1x A8N32 SLI Deluxe
    1x 3500+ venice core
    1x 2Gig OCZ DDR500 Platinum EB
    2x BFG 7800GT OC in SLI
    1x OCZ 520W Powerstream
    1x X-Fi Xtreme Music
    1x WD 250gb sata2 16mb cache
    1x G15 Gaming keyboard
    and plenty of other stuff...
    Reply With Quote Reply With Quote
  13. 06-12-2006, 10:50 AM #13
    Hystrix^
    Hystrix^ is offline
    Xtreme Member
    Join Date
    Mar 2006
    Location
    Belgium
    Posts
    243
    Yes you can put the sealstring of but it's an hard job

    Nice result
    DFI Lanparty nF4 SLI-D || AMD Athlon64 4000+ SD || 7900 GT|| GEIL 2*512mb BH-5 @250 Mhz 2-2-2-5 ||2*256 Old BH-5 285Mhz 2-2-2-5 || Tagan 530W

    Super Pi: 25s:Pic
    Reply With Quote Reply With Quote
  14. 06-12-2006, 11:11 AM #14
    eva2000
    eva2000 is offline
    Memory Addict
    Join Date
    Aug 2002
    Location
    Brisbane, Australia
    Posts
    11,651
    Quote Originally Posted by Onepagebook
    I am not surprised at all, I will try to get WR for 930
    bring it on for 1.9v vcore,
    Nice insulation work bro
    oh man you're going torture that poor 930 hehe
    ---
    Reply With Quote Reply With Quote
  15. 06-12-2006, 01:40 PM #15
    Supertim0r
    Supertim0r is offline
    INTEL inside
    Join Date
    Oct 2004
    Location
    Québec, Canada
    Posts
    3,258
    pics of your autocascade ?
    retired computer enthusiast
    Reply With Quote Reply With Quote
  16. 06-12-2006, 01:54 PM #16
    s7e9h3n
    s7e9h3n is offline
    Phenom™
    Join Date
    Sep 2002
    Posts
    5,163
    Quote Originally Posted by Supertim0r
    pics of your autocascade ?
    I'll get a few when I'm done with the mods, but I've got a couple with the work in progress:

    Evap(s)



    Torn to bits



    Heads Done

    FX56....
    Reply With Quote Reply With Quote
  17. 06-12-2006, 02:00 PM #17
    eva2000
    eva2000 is offline
    Memory Addict
    Join Date
    Aug 2002
    Location
    Brisbane, Australia
    Posts
    11,651
    oooh narrower evap base to mount on LGA775 boards ?
    ---
    Reply With Quote Reply With Quote
  18. 06-12-2006, 02:07 PM #18
    s7e9h3n
    s7e9h3n is offline
    Phenom™
    Join Date
    Sep 2002
    Posts
    5,163
    Quote Originally Posted by eva2000
    oooh narrower evap base to mount on LGA775 boards ?
    Hmmm...dunno about that...but it seems to fit fine

    FX56....
    Reply With Quote Reply With Quote
  19. 06-12-2006, 02:11 PM #19
    cromwello
    cromwello is offline
    Xtreme Recruit
    Join Date
    Mar 2006
    Posts
    82
    im being thick but one evap head cools the cpu wat does the other one do? gpu ? chipset? pretty tastey setup mate. im gonna build my first dual cascade in the summer( havent built a single stage before but my cousin works repairing industrial fridges so hes gonna help me get started).congrats on the work !!!
    athlon 64 4000,2x1gb XMS 4000@250mhz-2.5,3,3,7,leadtek 7800gtx extreme @550/1.39 stock volts,hiper type R 520W,400gb HD's.
    Reply With Quote Reply With Quote
  20. 06-12-2006, 02:11 PM #20
    eva2000
    eva2000 is offline
    Memory Addict
    Join Date
    Aug 2002
    Location
    Brisbane, Australia
    Posts
    11,651
    nice.. what's the diameter measure of the evap copper based ?

    well his cascaDe is so powerful i'd imagine he could cool 2x cpus for 2 systems at the same time LOL
    ---
    Reply With Quote Reply With Quote
  21. 06-12-2006, 02:12 PM #21
    s7e9h3n
    s7e9h3n is offline
    Phenom™
    Join Date
    Sep 2002
    Posts
    5,163
    Quote Originally Posted by eva2000
    nice.. what's the diameter measure of the evap copper based ?
    They're [modified] chilly1 evaps -> 1.5"
    FX56....
    Reply With Quote Reply With Quote
  22. 06-12-2006, 02:37 PM #22
    G H Z
    G H Z is offline
    ¿
    Join Date
    Jul 2003
    Posts
    4,772
    Quote Originally Posted by s7e9h3n
    Heads Done
    Thats pretty trick but it needs one more
    Reply With Quote Reply With Quote
  23. 06-12-2006, 02:58 PM #23
    hipro5
    hipro5 is offline
    k|ngp|n/Sham my brothers
    Join Date
    Aug 2002
    Location
    Athens---Hellas
    Posts
    5,693
    Ha, ha, ha.....s7e9h3n gets into "dark side" day by day - more and more....
    INTEL PWA FOR EVER

    Dr. Who my arss...
    .........

    Reply With Quote Reply With Quote
  24. 06-12-2006, 03:09 PM #24
    Supertim0r
    Supertim0r is offline
    INTEL inside
    Join Date
    Oct 2004
    Location
    Québec, Canada
    Posts
    3,258
    this cooler is huge !
    nice stuff...Intel...
    conroe soon ?
    retired computer enthusiast
    Reply With Quote Reply With Quote
  25. 06-12-2006, 03:22 PM #25
    Vapor
    Vapor is offline
    Admin
    Join Date
    Feb 2005
    Location
    Ann Arbor, MI
    Posts
    12,338
    Quote Originally Posted by hipro5
    Ha, ha, ha.....s7e9h3n gets into "dark side" day by day - more and more....
    Yes...the force is strong with him

    Grats s7e9h3n....that should quell the storm of doubters. Next they'll be asking you to run a Smithfield XE

    Anyway, sick speed there for sure!
    Reply With Quote Reply With Quote
Page 1 of 2 12 LastLast
« Previous Thread | Next Thread »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules