Thanks metro.cl and dinos22!
I'm suprised to hear these points measure that low values. Gonna have to have another look at the vGPU resistor network...Between 2 and 4 is 011
Between 2 and ground is 015
Everything else is like I expected. Especially the vGPU... Lot's of headroom to crank it up, the chip should take 1.4V with ease. :PPoints 5 & 6 were discarded because that particular resistor wasn't in the end that very interesting. 10.4 @ 200 dial = 10.4Ω
1.10 @ 20K dial = 1.10kΩ = 1100Ω
The dial selects the maximum measureable resistance. If the result is higher than the selected dial option then the device will simply display "1". So, in a way, one has to know approximately how much the measurement's result should be in order to accurately measure resistance.
Oh, and here is the vMEM mod & vMEM measuring points (stock vMEM is 1.8v ±5%:
Bookmarks