Ryzen - Return of the Jedi

[Formula350]

Tried 3333 with 2666 Sub & Turnaround timings, results in:
03 - System Agent initialization before Microcode loading.

Maybe I wasn't supposed to set Turnaround as well? I'll go drop those to Auto and try again heh

EDIT: Alright, booted after changing that.
(Primary is 18-18-18-38 2T)
Unfortunately, setting to 3466 and I get the usual: F9.
Set the tRFCs all to Auto... F9.
Set the ODT to 60Ohm... F9.
Set the DRAM voltage to 1.4V... F9.
Set the NB voltage to 1.2V... F9.
Set all the Drive Strengths to *shrug* I have no base, so middle value of 30Ohm... F9
Set the tCWL to 16, since I noticed it was 14... F9
Set all the Drive Strengths to 20Ohm (lowest)... F9
Set all the Drive Strengths to 120Ohm (highest)... F9 :|
Set them back to Auto; Set BankGroupSwap to Disabled... F9
Set BGS_Alt to Disabled... F9
Set all SubTimings to value +2... F9
*throws in the towel*


Still have no idea if setting the DRAM VREF Voltage to half that of DRAM Voltage will help, or if Auto does that on its own. OR if I should set it lower/higher...

EDIT2: PFF-hA :| Set it to 3333 and it won't even POST with things configured as they are. So I guess that's fairly telling of... well something. :P lol

Final EDIT: Loaded my tightened 3200, changed it to 3333, and much to my surprise it is in Windows with those timings! Maybe I should've tried a lower CPU-NB voltage instead of higher *shrug* Tests for another day. Going to see where this road leads me at 3333.