New progress on 2 dimm overclocking. 3466mhz achieved at 3.875 GHZ . I am uploadingvalidations. I have screen shots of the bios but they a re too large a file to upload the image. I just added AIDA64 memory report only.
Bios settings core voltage 1.3625 LLC profie 1 actual 1.408 v. , SOC voltage 1.152 actual CLDO_VDDP .99 v , dram voltage 1.44 v actual
memory timings 2T CR CL 16-16-16-16 42 tRC 72 BGS disabled ProcODT 63.3 OHMS. BIOS 1.73 beta MSI Titanium
Adding AIDA64 to the mix. Only memory benchmark ATTACH]132346[/ATTACH]
Aster several hours of use I had to abandon 3466mhz. I had 2 incidents where the system blanked out on me. My temps are great that is not an issue. Since I had soc voltage at 1.175 and dram voltage at 1.43 I did not feel comfortable jacking them up higher for stability. I see now why that bclock generator comes in handy. So I am back down to 3333mhz where I am completely stable. I played a little bit with my timings there. II noticed at default it sets trow cycle at 76 with cr2. I felt it was a bit too high and it did affect frame rates. I i dropped it to 64 cycles and it booted fne but performance in FPS was not what I expected. I played until I set it at 67 and my FPS jumped over 3 frames per second on cinebench 15, so I left it at 67. Ny CL is 14-14-14-36 CR2 and t row cycle 67.
Reply With Quote
Bookmarks