Ryzen - Return of the Jedi

[chew*]

chew: do you have a vid on measuring voltage at the socket?

http://www.xtremesystems.org/forums/...=1#post5256260

I got tired of soldering in so now just flipping boards while running them comparing idle vs bios and load vs bios with dmm @ socket.

Taichi has some weird covered/vented backplate. Stole one off my dead gaming 5 and swapped it to confirm that board.

The msi titanium guys on oc.net refuse to test socket voltage....but are claiming 1.3v stable 4 gig...be nice if someone showed us what the boards really sending to chip...

[AMD_OCer]

http://www.xtremesystems.org/forums/...=1#post5256260

I got tired of soldering in so now just flipping boards while running them comparing idle vs bios and load vs bios with dmm @ socket.

Taichi has some weird covered/vented backplate. Stole one off my dead gaming 5 and swapped it to confirm that board.

The msi titanium guys on oc.net refuse to test socket voltage....but are claiming 1.3v stable 4 gig...be nice if someone showed us what the boards really sending to chip...

So that means you are reading from the dmm and adjusting the vcore, SOC manually based on the readings you get from the dmm (physically)... kind of a PITA, but u get the best results. Are you entering the SOC and LLC based on "levels" on the MB, or completely manually as 1.xx volts?

Not sure if I would be able to measure SOC or vcore with the watercooling backplate from EK that I will be using. Have to wait and see.