MMM
Results 1 to 25 of 861

Thread: Ryzen - Return of the Jedi

Threaded View

  1. #11
    Xtreme Enthusiast
    Join Date
    Apr 2006
    Location
    Bulgaria
    Posts
    544

    Thumbs up

    Finally managed to recover my account, thanks to @FUGGER.
    Glad to see AMD section getting active again.

    Personally I got CH6H and two CPUs: 1700 and 1800X. The higher binned one is definitely hotter than the 1700, but clocks better.
    The supplied Wraith Spire box cooler is quite nice, though.
    Still haven't managed to boot 3600MHz, max for now is 3440 CAS12. Board works quite nice with Samsung B-Die chips, 3200MHz is not a problem.

    As for the PCI-E, I have a proven combo - 8500GT and ADATA SSD which are tested numerous times for speeds at 145+ MHz PCI-E.
    Generally any Nvidia 8xxx card should be fine. Don't know about newer ones.



    PS: 11-11-11 should work too, or even 11-10-10. Just like in the Asus guide. Tested this in a little lower speed and had no improvement in aida, however I haven't measured this with any other application.

    PS2: Some fun fact. I had Win7 x64 installed on the Z270 (Asus Apex) and it also has AsMedia controller, so drivers were there.
    Connected the SSD to the Hero and it booted. Plugged keyboard and mouse in the black USB ports, the OS automatically installed the drivers and voila - I had a working system.
    Last edited by I.nfraR.ed; 03-10-2017 at 07:11 AM.
    X6 1090T (1010MPMW) @ 4267MHz 1.44V NB@3229MHz 1.33V | Asus Crosshair IV Formula | 2x2GB Corsair Dominator GTX2 @ 1845MHz 6-6-5-17-22 1T | Asus HD4890 @ 1050/4800 | Corsair HX850W | HAF 932
    EK Supreme HF | EK-FC4890LT | MCP655 + Koolance D5 Top | ThermoChill PA120.3 + 3x Enermax Magma | XSPC Bay res | Masterkleer 1/2" UV Red

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •