RAJA or anyone for that matter.
I have the P8Z77 - V PRO. Actually this is my second board...
I am having an issue on cold boots. The PC Tries to POST, and the CPU_LED will stay solid for 5 second or so, then it shuts off and restarts. After it restarts it will hang on windows loading if I dont turn it off. I can't really replicate it by power draining the system, sometimes I can, and sometimes it's just a cold boot.
I actually have the CPU voltage at 1.35
2500K
Muskin 8GB Kit 1600MHz CAS 8
Patriot Wildfire 120GB SSD (I called patriot and updated the Firmware to 5.0.2)
Corsair TX750
Corsair H70
ATI HD5870
I have only really upped the turbo multi and added some voltage to the CPU. All other settings other than RAM speed and timings are auto.
It is 100% stable 12hr Prime95. Speed step is enabled.
I have the release bios, I had the same issue on the other board with the newer BIOS.
On the other board I had I went into the DIGI + Power Control and fricked with those settings (like CPU loadline calibration and upped that and so on) I've left everything auto for these settings though.
I have speed step on but most other processor settings off if I recall. What am I missing? Could it be the Overclock is frikin up? or the SSD causing POST issues with the new chipset?
Reply With Quote
Bookmarks