Quote Originally Posted by Piggin View Post
I have continued testing & I run prime 95 for 8 hrs with 125x38 @1.42 volts (memory set @ 2000Mhz)
The other settings were
VTT CPU - 1.2v
2nd VTTCPU - 1.05v
CPU VCCSA - 1.221v
DRAM - 1.668v
CPU PLL - 1.881v
PCH - 1.096v

Is there something I am missing or can I push any of the other settings a little harder due to being under water (have increased CPU voltage up to 1.5v & still getting 0101 codes)
Any help will be gratefully received
Those are nice 24/7 settings, if nothing better is gained.
You can try 100x48 with same or slightly higher voltage to see if there is effect from higher/lower multi.
Also try playing with CPU PLL (1.25V- 2.00V), and BCLK Skew/PCIE CLK Skew -1/-10, -2/-20, +1/+5, +1/+10, +2/+10.
Could be that CPU is not such a great one.