Quote Originally Posted by l0ud_sil3nc3 View Post
try playing with vccsa and vtt, for me the extreme oc profile was a bit high for ambient cooling, also raise cpu pll to 1.7 and make sure to leave pch at auto.

Very strangely when I leave PLL on auto it sets at 1.9v...



I have pretty much been running VTT at 1.2 -1.25 for everything.
I am about to put this on the cooler express as soon as I get the nerve up again.

I have tried raising my vcore to 1.56 to run 5.25ghz and it is very unstable but 5.1 seems stable just running wPrime and vantage with 1.48v.
I had a similar issue with the UD7. It would not go over 5.0ghz on liquid even with 1.50- 1.64v on the H100 and the temps were fine. Then on phase it went well over with way less voltage.

Why would that run at 1.9v on auto? and is this normal? In the Bios it runs 1.76 or in that areas on auto.