Quote Originally Posted by Raja@ASUS View Post
What memory do you have and what settings? I can see Gskill 32GB DDR3-1600, is this a 32GB kit or two 16GB kits combined?

If one module works fine then you will likely need to increase VCCSA and/or relax some of the sub-timings. Set VCCSA to around 1.10~1.20V, and try using the Hynix profile. If that does not help, try the Max MHz profile and then tighten down timings slowly.

-Raja
I'm using a 32gb kit. Here's the one:

http://www.newegg.com/Product/Produc...82E16820231498

VCCSA was set around 1.2 by using auto settings. I recall trying 16gb and it was ok. Didn't really get a chance to test it though. I take it Hynix profile is a setting in the BIOS? Along with Max MHz profile? By tightening you mean increasing timing from say default at 9 to say 10/11? I also recall seeing the memory run at around 1.65 volts at default, even though the sticks say 1.5. Should that be a problem? I'm kinda new at overclocking.

I'm at work and don't have access to it at the moment. If you could, give a quick step by step on what to adjust so when I do get home, I don't have to spend much time looking around for it, since I won't have much time tonight. Christmas shopping and all.

Thanks Raja!