Gskill F3-17000CL8-D

[ZenEffect]

heh, i only take of the heatspreader on certain memories. these are too nice to risk damaging them, so leave the heatspreaders on and trust you have bbse.

anyways, some c8 fun? (is c8 fun?)

heh. 8gb.

[l0ud_sil3nc3]

Got a few of C7..Different PCB (single sided) good for 24/7daily rig @ stock spd only

2133 C8 new batch back in stock...black pcb

http://www.newegg.com/Product/Produc...82E16820231450


New batch on top...

thanks Dumo, just grabbed another two sets of these, and I just found some of the 2200 7-10-10-27 Ripjaw X, so I should be good to go for SB-E

heh, i only take of the heatspreader on certain memories. these are too nice to risk damaging them, so leave the heatspreaders on and trust you have bbse.

anyways, some c8 fun? (is c8 fun?)

heh. 8gb.

what vccio and vtt as well as vdimm for that?

the speed is nice especially for 8GB

[websmile]

thanks Dumo, just grabbed another two sets of these, and I just found some of the 2200 7-10-10-27 Ripjaw X, so I should be good to go for SB-E







what vccio and vtt as well as vdimm for that?

the speed is nice especially for 8GB

Nice shopping trip, luckily I have around 50 gb BBSE and Hyper left running and some 2200 c7 psc, these are all not available in europe so I stopped selling yesterday after getting rid of my last 2000 c7 hypers. and I agree with leeghoof, wprime is no ram test

[l0ud_sil3nc3]

Nice shopping trip, luckily I have around 50 gb BBSE and Hyper left running and some 2200 c7 psc, these are all not available in europe so I stopped selling yesterday after getting rid of my last 2000 c7 hypers. and I agree with leeghoof, wprime is no ram test

no kidding, 2 kits of the 2133 8-9-8 for $240 shipped was a no brainer.


I also have some GTX3 coming to add to the 2200 7-10-10-27 PSC kits, but sadly no hypers in my arsenal

32M is what is needed to see memory stability, regardless, the newer kits seem to clock well also, not sure how they compare to the older ones but I can't wait to see.

[Dumo]

and I agree with leeghoof, wprime is no ram test

Probly we have different goal when it comes to ram. For me stability is not a priority. Good ram and mobo will served as base of a benching rig.

Try to find good clocking 2600K already time consuming, binning ram is the least of priority

[websmile]

Probly we have different goal when it comes to ram. For me stability is not a priority. Good ram and mobo will served as base of a benching rig.

Try to find good clocking 2600K already time consuming, binning ram is the least of priority

Good ram should do at least 32M or 3d stable wprime isn't even as good a test for bench mems as 1M - and btw, ram doesn't influence wprime score at all, 1333 and 2133 are all the same results ^^. I didn't ask for prime but was only interested if these are able to do benches that at least get some load on the mems, wprime is like screen stable

[Dumo]

Good ram should do at least 32M or 3d stable wprime isn't even as good a test for bench mems as 1M - and btw, ram doesn't influence wprime score at all, 1333 and 2133 are all the same results ^^. I didn't ask for prime but was only interested if these are able to do benches that at least get some load on the mems, wprime is like screen stable

I care less with 32m and those stability stress tests, only bench 3Ds for fun and it served me well
These rams go to temporary benching rig anyway...not for 24/7 stable daily machine.

This is good enough for me...



B/way heres with AMD rig...

[badatgames18]

@ dumo... thanks! i think i will get these soon
if i may ask what ram do you use for 24/7? i use just some 1600cl9 patriot (16gb)..
was a cheap 2133 16gb kit lol

thanks Dumo, just grabbed another two sets of these, and I just found some of the 2200 7-10-10-27 Ripjaw X, so I should be good to go for SB-E

if i may ask... where did you find the cl7 ripjaws x? they seem to clock better than the cl7 pi counterparts...
i have 8gb of gskill pi 2200cl7
4gb gtx3
4gb of some old 2000cl9 trident bbse
and for 24/7 i have 16gb of some patriot ram (i think hynix bfr)

for quad channel i think i am only able to use the gskill pi gotta buy 2 sets of these... hopefully they don't sell out by tuesday

[Leeghoofd]

Any real stability test on them clocks zeneffect ? are they 24/7 stable at them clocks ?

[ZenEffect]

Any real stability test on them clocks zeneffect ? are they 24/7 stable at them clocks ?

they are stable enough to bench with, as far as 24/7 clocks im just running then at 2133 8-9-8-20 8gb. there is no real advantage to running 2200+ imho so i didnt really check.

@ dumo

2 black pcb, 2 green pcb. both of these kits clock the same though.

[Dumo]

@ dumo

2 black pcb, 2 green pcb. both of these kits clock the same though.

Yep, it seems no difference here too Zen

[ZenEffect]

Yep, it seems no difference here too Zen

why does everybody want the green pcb? 8 layer? if blacks and greens clock to the point where the cpu/imc is the only real limiting factor, then whats the practical diff?

If i could afford it, id pick up another set or 2. these are by far the best kit of benching ram that have come out for sandybridge platform.