G.Skill Ripjaws DDR3-2000 CL9 2GB x2 - 2000MHz kits under 100$!!??

[ihog6hog]

I have new serial of Elpida on G.Skill ripjaws 2000C9-4GBRHD (test with 1.65V)

Elpida EBSE not BBSE


Thanks: Ro ฝากรูป


Thanks: Ro ฝากรูป


Thanks: Ro ฝากรูป


Thanks: Ro ฝากรูป


Thanks: Ro ฝากรูป

[gregorisvas]

:o 2100+ 8.9.8 1.65V looks really good Have you tried them at 1600/1800? (timings)

[ihog6hog]

:o 2100+ 8.9.8 1.65V looks really good Have you tried them at 1600/1800? (timings)

1600 and 1800


Thanks: Ro ฝากรูป


Thanks: Ro ฝากรูป

[Don_Dan]

i said and another 10 batchs

You said they all started with X..

Chips with code Txx and end with 3G-A(3G-U and 3G-P)are also PSC but newer batch.

Yes I know those are PSC mate, just teasing hiwa a bit!

I told you the Team 2200 had BBSE - now you have to believe it - btw, my geil 2133 Evo one could do 2250 9-9-9 and I think Geil only used PSC, didn´t they?

While you said many things back then, you never said that...

No idea about the GeIL kit in question, but they used these OEM Elpida chips as well on their 2133 C9 kits ( Ultra Series and Black Dragon ).

[websmile]

While you said many things back then, you never said that...

No idea about the GeIL kit in question, but they used these OEM Elpida chips as well on their 2133 C9 kits ( Ultra Series and Black Dragon ).

Of course I said that - would be weird PSC that do 1140 9-9-9 and 1200 9-10-9-24

BTW, @topic, my 24/7 Ripjaw 2000 9-9-9- they run worse than my 2000 trident who had the honour to be my worst mems before, but who cares -better than nothing

[gregorisvas]

I just noticed that the XMP profile in my modules is set @ 1.60Vdimm? :S Factory issue or something else?

[websmile]

Seems to vary randomly, the Ripjaws are labeled as 9-9-9-27 at 1,6V and have this XMP, the Trident 2000 I have are labeled exactly the ssame and have XMP at 1,60V- I don´t see any methodical difference^^

[gregorisvas]

Mine are labeled 9-9-9-27 1.65V that's why I'm asking

[websmile]

I don't know if there is a real difference / as said these Tridents are labeled the same as my Ripjaws at specs, but XMP is different, you can see it on the screen

The fact the tridents run a bit better can be normal oc-range - as the great poets from Limp Bizkit said - results may vary

[badatgames18]

sorry to post on an old thread, but are most or all tridents bbse? are some PSC?

i have two set of 2x2gb 9-9-9-27 tridents... i was hoping to run them both for 8gb but i'm not sure how it will effect it's overclockability... looking for atleast 2133 cas 8 or 7 for 24/7

EDIT: oh btw.. mine are 2000 9-9-9-27... i have a couple sets of them

[Eldonko]

Pretty sure my Trident 2133 9-9-9 are PSC. Havent looked but they scale to 1.74v and will do 2250 @ 7-9-7 for benching. Wish I could find another set.

[badatgames18]

well here is what i can do so far for 24/7
vdimm@1.65v
vccio@1.165v



Stay away from the EVGA P67 FTW board, until they fix the crappy bios.... plus memory scales terribly... same set does 7-9-7 2200MHz w/same volts on my ud7.

Anyone recommend anything better for 24/7 clocks? (<160 usd)

[hiwa]

u can try lower vccio o think

[badatgames18]

u can try lower vccio o think

lowered to 1.14v... still stable, not sure how low i should go... it's a pain applying my overclock again on this board so i don't want to lose it

Do you have any recommendations on ram that is less than 160 USD that's good for 24/7 use and benching?

I am returning this motherboard and buying a MIVE, very bad memory overclocking

[hiwa]

go with this 16gb if u want high capacity and u want enjoy oc with 8 and 16gb memories, they don't have very good oc caz they should be nanya i never used them but just heart people forget sniper series if u want OC

http://www.newegg.com/Product/Produc...82E16820231456

go with this if u like oc 8gb and good freq
http://www.newegg.com/Product/Produc...82E16820231476

this kit if u want fly but 4gb
http://www.newegg.com/Product/Produc...82E16820231454

[badatgames18]

go with this 16gb if u want high capacity and u want enjoy oc with 8 and 16gb memories, they don't have very good oc caz they should be nanya i never used them but just heart people forget sniper series if u want OC

http://www.newegg.com/Product/Produc...82E16820231456

go with this if u like oc 8gb and good freq
http://www.newegg.com/Product/Produc...82E16820231476

this kit if u want fly but 4gb
http://www.newegg.com/Product/Produc...82E16820231454

for 8gb 9-11-10 isn't that good is it? if i try to get higher freq... would i need to loosen the timings more?
looks interesting... i might buy and i'll post what results i get...

thanks!

[hiwa]

the F3-17000CL9D-8GBXM are very nice memories and they are very good Hynix ICs if u are lucky u will enjoy nice oc with them, maybe u can show 2200 same timing same voltage.
Update us

[Eldonko]

I picked up 2 kits of CMX4GX3M2A2000C9, 2000 9-9-9. Was on sale for $35 per 4GB kit so I couldnt resist. Will post results shortly.

[badatgames18]

I picked up 2 kits of CMX4GX3M2A2000C9, 2000 9-9-9. Was on sale for $35 per 4GB kit so I couldnt resist. Will post results shortly.

excited to see the results! i was thinking of buying these also...

on another note i found some: SuperTalent Project X W1800UX2GBP?

1800 7-7-7

that someone just offered to sell me, but i have no idea what ic they use... he can't find a link, and neither can i that lists the specs.

[hiwa]

they are hypers and very nice but fragile memories, if i am not wrong that series must be MNH ic

[gregorisvas]

/Thread Revival: on

These are my results Nothing special, i'm just happy about it cause i got 'em cheap :p

/Thread Revival: off