The last test posted was with 9216gb selected and my temps were only in the mid to high 60's to low 70's, made a few adjustments to settings QPI to 1.26 in BIOS and uncore value to 3254 up from min of 3011 or so. Another run through and at two tests done (will post screen shot if it all finished) the temps are running hotter at the lowest core at 72c and highest at 82c. The GFlops are now up to 83.9 and 84.2. system seems stable as I am posting at the same time on it. The only other thing I did was take the side off the case for a little breathing room. Hope it makes this run, no adjustment to vcore at 1.37 in BIOS. The test is fast with the higher GFLops each line before was taking 11 minutes and now down to 9 each calculation. Will post screen shot if it finishes without error.

Quote Originally Posted by zoson View Post
No, this is the issue me and Andreezy have been talking about. Except it's happening to him at 9216 instead of ~10gb.
I can clock my cpu up to 4.5 with 1.425vcore and it appears stable as long as I'm using >9216. The difference in gflops is 80 -> 55. His config is so similar to mine that he should have very similar results, except slightly faster.

It's easy to see the difference because the cpu cores won't get as hot as they normally would.
vs