Quote Originally Posted by MagisD View Post
Or add more rads.
i use a MORA3 Pro 9x120. it takes care of heat VERY nicely... much more effectivelly than my 4x120 double thickness did. i have my fans set to 900rpm though aswell, just might not be enough air flow going through. it's just a really big loop and all the added heat from PWM's, voltage regulators, notrh south chipsets and a dual GPU VGA going on at once, it's alot of soak heat. i just need to isolate my CPU to it's self. it doesn't help that my 5970 is sitting at 1ghz core and 1300 mem now on 1.225 volt daily... that's soaking too.


Quote Originally Posted by tomovk View Post
Hi guys!

I was working on my 990x OC, and i got to the point where i am stable on 4.5ghz, 1.375v in bios, 1.363v in idle (cpu-z), and 1.330v in load (cpu-z), but im only stable in prime95 small fft. when i do blend, it is reporting errors, never BSODs. I flashed to bios 0003, and i can modify tRL values now, but i dont know where to start. whatever i try, i gate errors. i have g skill trident 2000mhz 9-9-9-24 kit, and i run it at 1804 with uncore of 3608. PLEASE HELP. I tried raising qpi/dram voltage and ram voltage, no use. temps dont get above 72c.
start out around 57-58 range. do 57-59-60 and try that out. i'm guessing you're using 3 sticks so you may be able to go lower around 53-55-56. that +2/+1 thing does help alot with getting it stable.

i was running +1/+1 for my rTL's and it was fine for a while but started BSOD'ing on me in games after a while. so i put it to +2/+1 to 60-62-63 for 1866 / 6 sticks at 12gigs and 7-9-7-24-72 1T and it's been workin like a charm for almost a full day now.